Menu Close
SuperGlaze Aluminum MIG Wire Family

Diameters / Packaging

Diameters
 7 KG SPOOL (BS300)
 7.26 KG SPOOL (S300)
 136 KG Gem-Pak™
 136 KG Gem-Pak™
1.0 mm ED701753 ED702747
1.2 mm ED701754 ED702748 ED036610
1.6 mm ED701755 ED036611

SuperGlaze® MIG 4043

MIG (GMAW)

CLASSIFICATIONS:
AWS A5.10 : ER4043
EN ISO 18273 : S Al 4043 (AlSi5)

Aluminum MIG Welding Wire

Diameter

Select Diameter

  • 1.0 mm
  • 1.2 mm
  • 1.6 mm

Package

Select Package

  • 7 KG SPOOL (BS300)
  • 7.26 KG SPOOL (S300)
  • 136 KG Gem-Pak™
  • 136 KG Gem-Pak™

DETAILS

4043 is a great choice for the welding of heat-treatable base alloys and more specifically the 6XXX series alloys. It has a lower melting point and more fluidity than the 5XXX series filler alloys and is preferred by welders because of its favorable operating characteristics. ER4043 type wires may reduce crack sensitivity with the 6XXX series base alloys. 4043 is suitable for sustained elevated temperature service, i.e. above 65°C.

Features

  • Designed for welding heat-treatable base alloys and more specifically the 6XXX series alloys
  • Lower melting point and more fluidity than the 5XXX series filler alloys
  • Low sensitivity to weld cracking with the 6XXX series base alloys

Typical Applications

  • 6XXX alloys, and most casting alloys
  • Automotive components such as frame and drive shafts
  • Bicycle frames
  • Bicycle frames

Welding Positions

  • All except vertical down

Shielding Gas

  • I1 : Inert gas Ar (100%), I3 : Inert gas Ar+ 0.5-95% He, Flow rate : 14.2-23.6 l/min

Special Features

Service Information

You May Also Need

Image not found

Gem-Pak® Hood (23 in) Direct Pull Kit

K2860-1
Square Hood for Accu-Pak Boxes

Accu-Pak® Box Payoff Kit - 24 in

K2175-2

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.10 ER4043

WIRE COMPOSITION

Classification %Be %Mg %Zn %Cu %Fe %Mn %Si %Ti
ER4043 Requirement 0.0003 max. 0.05 max. 0.10 max. 0.30 max. 0.8 max. 0.05 max. 4.5 - 6.0 0.20 max.
Typical Result 0.0000 0.01 0.00 0.03 0.1 0.00 5.1 0.02

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Gas Flow
L/min (CFH) 		Polarity CTWD
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps
0.9 mm (.035") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 14.9 (585) 23.3 170
1.2 mm (3/64") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 8.9 (350) 25.2 195
1.6 mm (1/16") 100% Ar 14-24 (30-50) DC+ 12.7 (¹/₂) - 15.9 (⁵/₈) 6.4 (250) 24.0 240