Menu Close
Excalibur Stick Electrode

Diameters / Packaging

Diameters
 (3) 10 lb Easy Open Can
 50 lb Easy Open Can
1/8 x 14 in (3.2 x 350 mm) ED032562 ED010203
3/16 x 14 in (4.8 x 350 mm) ED010207
3/32 x 12 in (2.4 x 300 mm) ED032561 ED010211
5/32 x 14 in (4.0 x 350 mm) ED010216
7/32 x 18 in (5.6 x 450 mm) ED010219

Fleetweld® 5P®

Stick (SMAW)

AWS:
AWS : E6010

Mild Steel, Cellulosic • AWS E6010

Diameter

Select Diameter

  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/16 x 14 in (4.8 x 350 mm)
  • 3/32 x 12 in (2.4 x 300 mm)
  • 5/32 x 14 in (4.0 x 350 mm)
  • 7/32 x 18 in (5.6 x 450 mm)

Package

Select Package

  • (3) 10 lb Easy Open Can
  • 50 lb Easy Open Can
Buy Now

DETAILS

Features

  • Deep arc penetration
  • Light slag with minimal arc interference
  • Excellent vertical and overhead capability

Typical Applications

  • Cross country and in-plant pipe welding
  • Steel with moderate surface contaminants
  • Square edge butt welds
  • Welding on galvanized and specially coated steels

Welding Positions

  • All

Shielding Gas

  • Not Applicable

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

Documentation

You May Also Need

50 lb Can of Lincoln Electric Stick Electrodes

Fleetweld® 5P

ED010207
50 lb Can of Lincoln Electric Stick Electrodes

Fleetweld® 5P

ED010211
50 lb Can of Lincoln Electric Stick Electrodes

Fleetweld® 5P

ED010216
50 lb Can of Lincoln Electric Stick Electrodes

Fleetweld® 5P® Stick Electrode (SMAW)

ED010219
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E6010
ABS AWS A5.1 E6010
CWB CSA W48 E4310
LR LR - Chapter 11 3M

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
E6010 Requirement 330 (48) min. 410 (60) min. 22 min. 27 (20) min.
Typical Result, As-welded 380-470 (56-68) 460-560 (67-82) 22-32 32-118 (23-87)

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V
E6010 Requirement 0.20 max. 0.20 max. 1.20 max. 0.30 max. 0.30 max. 1.00 max. 0.08 max.
Typical Result 0.10-0.13 0.05 max. 0.35-0.60 0.01 max. 0.03 max. 0.004-0.012 0.004-0.012 0.14-0.39 0.01 max.

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 40-80
3/32 in (2.4 mm) DC- 50-85
1/8 in (3.2 mm) DC+ 70-130
1/8 in (3.2 mm) DC- 75-135
5/32 in (4.0 mm) DC+ 90-165
5/32 in (4.0 mm) DC- 100-175
3/16 in (4.8 mm) DC+ 140-225
3/16 in (4.8 mm) DC- –
7/32 in (5.6 mm) DC+ 200-275
7/32 in (5.6 mm) DC- –
1/4 in (6.4 mm) DC+ 220-325
1/4 in (6.4 mm) DC- –

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.