Menu Close
10 Pound Cans of Stick Electrode

Diameters / Packaging

Diameters
 (3) 10 lb Easy Open Can
 50 lb Easy Open Can
2.5 x 305 mm (3/32 x 12 in) ED032609
3.2 x 355 mm (1/8 x 14 in) ED032610 ED030848
4.0 x 355 mm (5/32 x 14 in) ED032611 ED030849

Pipeliner® 6P+

Stick (SMAW)

AWS:
E6010

Mild Steel, Cellulosic • AWS E6010

Diameter

Select Diameter

  • 2.5 x 305 mm (3/32 x 12 in)
  • 3.2 x 355 mm (1/8 x 14 in)
  • 4.0 x 355 mm (5/32 x 14 in)

Package

Select Package

  • (3) 10 lb Easy Open Can
  • 50 lb Easy Open Can
Buy Now

DETAILS

Designed for vertical down welding of cross-country and in-plant pipe

Features

  • High operator appeal and control
  • Easy slag removal
  • Standard in the pipe welding industry
  • Meets NACE MR0175 for sour gas applications
  • Test data available for SSC (NACE TM0177) & HIC (NACE TM0284)

Typical Applications

  • Cross country and in-plant pipe welding
  • Root pass on up to X80 grade pipe
  • Hot, fill and cap pass on up to X60 grade pipe

Welding Positions

  • All

Shielding Gas

  • Not Applicable

Special Features

  • Q2 Lot® - Lot Controlled Chemistry and Mechanical Properties

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

You May Also Need

50 lb Can of Lincoln Electric Stick Electrodes

Fleetweld® 5P+

ED010278
K2394-1-Stick Electrode Holder & Cable Assembly Kit

Stick Electrode Holder and Cable Assembly (Twist Mate™)

K2394-1
K875 Accessory Kit

Accessory Kit - 150 Amp

K875
Heavy Duty Leather Welding Jacket

Heavy Duty Leather Welding Jacket - Large

K2989-L
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E6010
ISO ISO 2560-A E 42 3 C 2 1
ABS AWS A5.1 E6010
CWB CSA W48 E4310
DNV-GL DNV - 2.9 3

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Hardness Rockwell B
E6010 Requirement 330 (48) min. 410 (60) min. 22 min. 27 (20) min.
Typical Result, As-welded 400-560 (59-81) 490-670 (72-98) 22-33 29-113 (21-83) 84-86

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V
E6010 Requirement 0.20 max. 0.20 max. 1.20 max. 0.30 max. 0.30 max. 1.00 max. 0.08 max.
Typical Result 0.10-0.20 0.01-0.04 0.43-0.73 0.03 max. 0.07 max. 0.003-0.012 0.003-0.014 0.12-0.30 0.01 max.

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
2.5 mm (3/32 in) DC+ 50-85
2.5 mm (3/32 in) DC- 50-85
3.2 mm (1/8 in) DC+ 75-135
3.2 mm (1/8 in) DC- 75-135
4.0 mm (5/32 in) DC+ 100-175
4.0 mm (5/32 in) DC- 100-175

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.