Menu Close
50 lb Can of Lincoln Electric Stick Electrodes

Diameters / Packaging

Diameters
 (3) 10 lb Easy Open Can
 50 lb Easy Open Can
3.2 x 350 mm (1/8 x 14 in) ED032615
3.2 x 355 mm (1/8 x 14 in) ED030826
4.0 x 350 mm (5/32 x 14 in) ED032616
4.0 x 355 mm (5/32 x 14 in) ED030827
5.0 x 350 mm (3/16 x 14 in) ED032617
5.0 x 355 mm (3/16 x 14 in) ED030828

Pipeliner® 8P+

Stick (SMAW)

AWS:
E8010-G
E8010-P1

Low Alloy, Cellulosic, Pipe • AWS E8010-P1, also meets E8010-G

Diameter

Select Diameter

  • 3.2 x 350 mm (1/8 x 14 in)
  • 3.2 x 355 mm (1/8 x 14 in)
  • 4.0 x 350 mm (5/32 x 14 in)
  • 4.0 x 355 mm (5/32 x 14 in)
  • 5.0 x 350 mm (3/16 x 14 in)
  • 5.0 x 355 mm (3/16 x 14 in)

Package

Select Package

  • (3) 10 lb Easy Open Can
  • 50 lb Easy Open Can
Buy Now

DETAILS

Designed for vertical down welding of cross-country and in-plant pipe

Features

  • High productivity in vertical down and out-of-position pipe welding
  • Deep penetration
  • Clean, visible weld puddle
  • Meets NACE MR0175 for sour gas applications
  • Test data available for SSC (NACE TM0177) & HIC (NACE TM0284)

Typical Applications

  • Root pass welding of up to X80 grade pipe
  • Hot, fill and cap pass of up to X70 grade pipe

Welding Positions

  • All positions

Shielding Gas

  • Not Applicable

Special Features

  • Q2 Lot® - Lot Controlled Chemistry and Mechanical Properties

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

You May Also Need

50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 8P+

ED030827
50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 8P+

ED030828
K2394-1-Stick Electrode Holder & Cable Assembly Kit

Stick Electrode Holder and Cable Assembly (Twist Mate™)

K2394-1
K875 Accessory Kit

Accessory Kit - 150 Amp

K875
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E8010-G, E8010-P1
ABS AWS A5.5 E8010-P1
TUV AWS A5.5 E8010-P1
CWB CSA W48 E5510-P1

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) 		Charpy V-Notch
J (ft-lbs) @ -45°C (-50°F) 		Hardness Rockwell B
E8010-P1 Requirement 460 (67) min. 550 (80) min. 19 min. 27 (20) min.
Typical Result, As-welded 460-560 (67-81) 560-680 (82-98) 19-30 51-114 (38-84) 56-88 (41-65) 33-96 (25-71) 88-92

DEPOSIT COMPOSITION

Classification %B %C %Cr %Mn %Mo %Ni %P %S %Si %V
E8010-P1 Requirement 0.20 max. 0.30 max. 1.20 max. 0.50 max. 1.00 max. 0.03 max. 0.03 max. 0.60 max. 0.10 max.
Typical Result 0.002 max. 0.11-0.20 0.01-0.05 0.55-0.91 0.09-0.21 0.60-1.00 0.01 max. 0.01 max. 0.09-0.36 0.02 max.

TYPICAL OPERATING PROCEDURES

Diameter Polarity Current
Amps
3.2 mm (1/8 in) DC+ 65-120
4.0 mm (5/32 in) DC+ 100-165
5.0 mm (3/16 in) DC+ 130-210