DETAILS
Features
- Light slag for minimal arc interference
- Deep penetration
- Clean, visible weld puddle
- Superior puddle control
Typical Applications
- Hot, fill and cap pass of up to X65 grade pipe
- Root pass welding of up to X80 grade pipe
Welding Positions
- All positions
Shielding Gas
- Not Applicable
Disclaimers
Service Information
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.5 | E7010-P1 |
| ABS | AWS A5.5 | E7010-P1 |
| CWB | CSA W48 | E4910-P1 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
|---|---|---|---|---|
| E7010-P1 Requirement | 410 (60) min. | 480 (70) min. | 22 min. | 27 (20) min. |
| Typical Result, As-welded | 430-490 (62-70) | 530-580 (76-85) | 22-29 | 27-96 (20-71) |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V |
|---|---|---|---|---|---|---|---|---|---|
| E7010-P1 Requirement | 0.20 max. | 0.30 max. | 1.20 max. | 0.50 max. | 1.00 max. | 0.03 max. | 0.03 max. | 0.60 max. | 0.10 max. |
| Typical Result | 0.08-0.16 | 0.01-0.04 | 0.43-0.53 | 0.26-0.33 | 0.01-0.04 | 0.01 | 0.01 max. | 0.06-0.18 | 0.005 max. |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Current
Amps |
|---|---|---|
| 1/8 in (3.2 mm) | DC+ | 75-130 |
| 5/32 in (4.0 mm) | DC+ | 90-185 |
| 3/16 in (4.8 mm) | DC+ | 140-225 |