Diameters / Packaging
|
Diameters |
60 lb Coil |
|---|---|
| 3/32 in (2.4 mm) | ED031871 |
DETAILS
A nickel-bearing electrode with 1/2% molybdenum. This electrode is used for higher strength weldements where impact properties exceeding 27 J (20 ft·lbf) at -62°C (-80°F) are required. It is suitable for use where consumables with less than 1% Ni are required.
Features
- A nickel-bearing electrode with 1/2% molybdenum
- Can be used for higher strength weldments where impact properties exceeding 27 J (20 ft·lbf) at -62°C (-80°F) are required
- Suitable for use where consumables with less than 1% Ni are required
- Actual (Type 3.1) certificates for each lot of wire showing chemical composition are available in the certificate center of lincolnelectric.com
Welding Positions
- Not applicable
Shielding Gas
- 0
Service Information
Documentation
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
WIRE COMPOSITION
| Classification | %C | %Mn | %Mo | %Ni | %P | %S | %Si | %Total Cu |
|---|---|---|---|---|---|---|---|---|
| EF3 Requirement | 0.10 - 0.18 | 1.50 - 2.40 | 0.40 - 0.65 | 0.70 - 1.10 | 0.025 max. | 0.025 max. | 0.30 max. | 0.35 max. |
| S3Ni1Mo Requirement | 0.07 - 0.15 | 1.30 - 1.80 | 0.45 - 0.65 | 0.80 - 1.20 | 0.020 max. | 0.020 max. | 0.05 - 0.35 | |
| Typical Result | 0.12 | 1.79 | 0.52 | 0.84 | 0.008 | 0.005 | 0.23 | 0.07 |