Diameters / Packaging
|
Diameters |
60 lb Coil |
|---|---|
| 3/32 in (2.4 mm) | ED031871 |
DETAILS
- A nickel-bearing electrode with 1/2% molybdenum
- Can be used for higher strength weldments where impact properties exceeding 27 J (20 ft·lbf) at -62°C (-80°F) are required
- Suitable for use where consumables with less than 1% Ni are required
Features
- A nickel-bearing electrode with 1/2% molybdenum
- Can be used for higher strength weldments where impact properties exceeding 27 J (20 ft•lbf) at -62°C (-80°F) are required
- Suitable for use where consumables with less than 1% Ni are required
- Actual (Type 3.1) certificates for each lot of wire showing chemical composition are available in the certificate center of lincolnelectric.com
Service Information
Documentation
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
WIRE COMPOSITION
| Classification | %C | %Mn | %Mo | %Ni | %P | %S | %Si | %Total Cu |
|---|---|---|---|---|---|---|---|---|
| EF3 Requirement | 0.10 - 0.18 | 1.50 - 2.40 | 0.40 - 0.65 | 0.70 - 1.10 | 0.025 max. | 0.025 max. | 0.30 max. | 0.35 max. |
| S3Ni1Mo Requirement | 0.07 - 0.15 | 1.30 - 1.80 | 0.45 - 0.65 | 0.80 - 1.20 | 0.020 max. | 0.020 max. | 0.05 - 0.35 | |
| Typical Result | 0.12 | 1.79 | 0.52 | 0.84 | 0.008 | 0.005 | 0.23 | 0.07 |