Menu Close
50 lb Can of Lincoln Electric Stick Electrodes

Diameters / Packaging

Diameters
 Can 22,7 kg
1/8 x 14 in (3.2 x 350 mm) ED031611
4.0x350 mm ED031612

Pipeliner® 7P+

Stick (SMAW)

CLASSIFICATIONS:
E7010-P1
also meets E7010-G

Low Alloy, Cellulosic, Pipe • AWS E7010-P1, also meets E7010-G

Diameter

Select Diameter

  • 1/8 x 14 in (3.2 x 350 mm)
  • 4.0x350 mm

Package

Select Package

  • Can 22,7 kg

DETAILS

Designed for vertical down welding of cross-country and in-plant pipe

Features

  • Root pass welding of up to X80 grade pipe
  • Hot, fill and cap pass of up to X65 grade pipe
  • Vertical down welding
  • Meets NACE MR0175 for sour gas applications
  • Test data available for SSC (NACE TM0177) & HIC (NACE TM0284)
  • Cellulosic electrode

Typical Applications

  • High productivity in vertical down and out-of-position pipe welding
  • Deep penetration
  • Clean, visible weld puddle

Welding Positions

  • All positions

Shielding Gas

  • Not Applicable

Special Features

  • Q2 Lot® - Lot Controlled Chemistry and Mechanical Properties

Service Information

You May Also Need

50 lb Can of Lincoln Electric Stick Electrodes

Shield-Arc® HYP+

ED029509
50 lb Can of Lincoln Electric Stick Electrodes

Shield-Arc® HYP+

ED029511
50 lb Can of Lincoln Electric Stick Electrodes

Shield-Arc® HYP+

ED029513
50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 7P+

ED031612
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E7010-G, E7010-P1
ISO ISO 2560-A E 46 3 1Ni C 2 1
ABS AWS A5.5 E7010-P1
TUV AWS A5.5 E7010-P1

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) 		Hardness Rockwell B
E7010-P1 Requirement 410 (60) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 460-540 (67-79) 560-660 (81-95) 22-32 54-110 (40-81) 37-103 (27-76) 81-91

DEPOSIT COMPOSITION

Classification %B %C %Cr %Mn %Mo %Nb %Ni %P %S %Si %V
E7010-P1 Requirement 0.20 max. 0.30 max. 1.20 max. 0.50 max. 1.00 max. 0.03 max. 0.03 max. 0.60 max. 0.10 max.
Typical Result 0.002 0.11-0.18 0.04 max. 0.50-0.88 0.07-0.20 0.010 max. 0.66-0.97 0.01 0.01 max. 0.10-0.40 0.01

TYPICAL OPERATING PROCEDURES

Diameter Polarity Current
Amps
3.2 mm (1/8 in) DC+ 65-130
4.0 mm (5/32 in) DC+ 100-165
5.0 mm (3/16 in) DC+ 130-210