Excalibur Stick Electrode

Diameters / Packaging

Diameters
50 lb Carton
50 lb Easy Open Can
1/8 x 14 in (3.2 x 350 mm) ED010153
3/16 x 14 in (4.8 x 350 mm) ED010156
3/32 x 12 in (2.4 x 300 mm) ED010161
5/32 x 14 in (4.0 x 350 mm) ED010165
5/64 x 12 in (2.0 x 300 mm) ED010170

Fleetweld® 37

Stick (SMAW)

CLASSIFICATIONS:
E6013

Mild Steel, Rutile • AWS E6013

DETAILS

Features

  • Operable with low amperage on sheet metal
  • Excellent bead appearance
  • Slag control accommodates vertical down welding

Typical Applications

  • Maintenance
  • Repair
  • For use with small AC welders with low OCV
  • Sheet metal
  • Irregular short welds that change positions

Welding Positions

  • All

Shielding Gas

  • Not Applicable

Service Information

Documentation

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E6013
ISO ISO 2560-B E4313 A
ABS AWS A5.1 E6013
BV BV - Chapter 5 1
CWB CSA W48 E4313
DNV-GL DNV - 2.9 1
LR LR - Chapter 11 1M

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi)
Tensile Strength
MPa (ksi)
Elongation
%
Hardness Rockwell B
E6013 Requirement 330 (48) min. 410 (60) min. 17 min.
Typical Result, As-welded 400-460 (57-66) 460-540 (66-79) 24-32 77-87

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V
E6013 Requirement 0.20 max. 0.20 max. 1.20 max. 0.30 max. 0.30 max. 1.00 max. 0.08 max.
Typical Result 0.06-0.08 0.02-0.04 0.35-0.44 0.01 max. 0.01-0.04 0.010-0.018 0.005-0.013 0.20-0.28 0.01-0.02

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
5/64 in (2.0 mm) AC 50-80
5/64 in (2.0 mm) DC± 45-75
3/32 in (2.4 mm) AC 75-115
3/32 in (2.4 mm) DC± 70-105
1/8 in (3.2 mm) AC 110-140
1/8 in (3.2 mm) DC± 100-135
5/32 in (4.0 mm) AC 160-200
5/32 in (4.0 mm) DC± 145-180
3/16 in (4.8 mm) AC 205-260
3/16 in (4.8 mm) DC± 185-235

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.