Cross Country 300
Cross Country 300
Cross Country 300
Cross Country 300
Cross Country 300

Cross Country® 300 (Kubota®)

K4166-1

Excellent welder/generator capable of DC multi-purpose welding, 120/240 VAC single phase, and 240 VAC three phase auxiliary power. Designed for pipeline welding, the Cross Country 300 features dual output control to fine-tune the welding arc, all in a compact, lightweight package to fit into truck beds.

Output

Output Output

Input

Input

DETAILS

When you're in the cross-country pipeline welding business, your results are only as good as the arc quality, reliability, and portability of your equipment. The Cross Country® 300 engine-driven welder gives you all three of these and more. The Cross Country 300 keeps the operation simple with intuitive constant current (CC), constant voltage (CV), and TIG mode control. This enables the user to easily change over from stick to wire to TIG welding processes. But sometimes a worker in the field needs more than just a welder. The Cross Country 300 gives you plenty of single and three phase AC generator power for grinders, pumps and trailers. It all comes in a compact, lightweight package that will fit into any truck bed and give you plenty of visibility through the rear window.

Features

  • It's All About the Arc – Out on the pipeline spread, your job depends on whether each and every weld passes inspection. The Cross Country 300 stick arc was tuned by pipeline welders for pipeline welders. That means puddle performance is excellent for root, fill, and cap passes and designed for cellulosic or low hydrogen stick electrodes.
  • The Size is Right – On remote job sites, you have to carry everything with you. This puts space on your rig at a premium. The Cross Country 300 is the most compact engine-driven pipe welder in its class and easily fits on most trucks. That means you get a small footprint, short height for great visibility through the truck’s rear window, and lower weight to go easier on your truck’s suspension. The powder-coated steel enclosure and polished stainless steel exhaust stack will look great on your rig and will stand up to years of cross country travel. The new heavy-duty stainless steel case and rugged wired or wireless remotes add to the durability and utility of these welders.
  • Easy To Use – It’s easy to get started with the Cross Country 300. Dual continuous controls designed for pipeline welding help you tune the arc for the pipe, pass, position, conditions and more. Fewer controls improve simplicity and reliability. Service access for routine maintenance is easy, even on the truck, with sliding engine access doors on each side of the machine. Battery jumper studs are also conveniently located. Digital meters and dashboard gauges monitor key functions.
  • Flexible – When your project calls for wire or TIG welding, you’ll be ready. The Cross Country 300 supports DC stick, wire and TIG processes and easily connects to Lincoln Electric wire feeders. The powerful generator produces plenty of power for grinders, pumps and travel trailers – up to 11kW continuous three phase power. An engine block heater, standard equipment on the Cross Country 300, enables operation in cold weather environments.

Service Information

What's Included

  • Machine Only

You May Also Need

Specifications

Weights & Dimensions

Dimensions (H x W x D) 810 mm x 643 mm x 1422 mm (31.9 in x 25.3 in x 56.0 in)
Net Weight 469 kg (1034 lbs)

Features

Machines Processes Stick (SMAW)
Gouging (CAC-A)
TIG (GTAW)
MIG (GMAW)
Flux-Cored Self-Shielded (FCAW-S)
Flux-Cored Gas-Shielded (FCAW-G)
IEC Rating 300A / 32V / 100% @ 104°F (40°C)
Max Rating 350A / 28V / 100% @ 104°F (40°C)
Output Range by Mode Stick: 40 – 300 Amps, Touch Start TIG: 20 – 250 Amps, CV-Wire: 14 – 32 Volts
Open Circuit Voltage 80 Peak OCV @ 1800 RPM
Rated Gouging Carbon Diameter 1/4 in (6.5 mm)

Engine Drive Specifications

Single Phase Auxiliary Output 10,000 Watts Continuous, 120/240V
Three Phase Auxiliary Output 11,000 Watts Continuous, 240V
Auxiliary Output Frequency 60 Hz
Receptacle Types NEMA 5-20R
NEMA 14-50R
NEMA 15-50R
Engine Brand & Model Kubota® V1505
Engine Description 4 Cylinder Naturally Aspirated Water Cooled Diesel Engine
Engine Horsepower 22.0 hp (16.4 kW)
Engine Block Size & Displacement 91.4 cu. in (1.5 L), Bore x Stroke - 3.07 in x 3.09 in (78 mm x 78 mm)
Emissions Rating US EPA Tier 4 Final
High Idle Operating Speed @ Rated Output 1800
Low Idle Operating Speed 1350
Fuel Tank Size (US gal.) 11.6 US gal.
Fuel Tank Size (L) 44 L
Oil Capacity (qts.) 6.4 qts.
Oil Capacity (L) 6.0 L
Coolant Capacity (US gal.) 1.2 US gal.
Coolant Capacity (L) 4.5 L

Application

Typical Application Construction
Cross Country Pipeline
Construction & Field Erection
High-strength Pipe
Maintenance & Repair
Oil & Gas
Pipeline & Offshore
Piping
Power Generation
Structural Fabrication

Warranty

Warranty 3 Years Parts and Labor - Engine warranted separately by engine manufacturer