Menu Close
50 lb Can of Lincoln Electric Stick Electrodes

Diameters / Packaging

Diameters
 50 lb Easy Open Can
1/8 x 14 in (3.2 x 350 mm) ED037582
3/16 x 14 in (4.8 x 350 mm) ED034458
3/16 x 14 in (5.0 x 350 mm) ED034457
5/32 x 14 in (4.0 x 350 mm) ED034456

Pipeliner® Arc 80

Stick (SMAW)

CLASSIFICATIONS:
E8010-G
E8010-P1

Low Alloy, Cellulosic, Pipe • AWS E8010-P1, also meets E8010-G

Diameter

Select Diameter

  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/16 x 14 in (4.8 x 350 mm)
  • 3/16 x 14 in (5.0 x 350 mm)
  • 5/32 x 14 in (4.0 x 350 mm)

Package

Select Package

  • 50 lb Easy Open Can

DETAILS

Designed for vertical down welding of cross-country and in-plant pipe

Features

  • High productivity in vertical down and out-of-position pipe welding
  • Deep penetration
  • Clean, visible weld puddle
  • Meets NACE MR0175 for sour gas applications
  • Test data available for SSC (NACE TM0177)

Typical Applications

  • Root pass welding of up to X80 grade pipe
  • Hot, fill and cap pass of up to X70 grade pipe

Welding Positions

  • All

Shielding Gas

  • Not Applicable

Special Features

  • • Q2 Lot® - Lot Controlled Chemistry and Mechanical Properties • Excellent impact properties without the intentional addition of Boron

Service Information

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E8010-G, E8010-P1
CWB CSA W48 E5510-P1

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Charpy V-Notch
J (ft-lbs) @ -45°C (-50°F) 		Hardness Rockwell B
E8010-P1 Requirement 460 (67) min. 550 (80) min. 19 min. 27 (20) min.
Typical Result, As-welded 460-540 (67-78) 550-650 (80-94) 19-29 51-114 (38-84) 34-93 (25-69) 86-98

DEPOSIT COMPOSITION

Classification %B %C %Cr %Mn %Mo %Ni %P %S %Si %V
E8010-P1 Requirement 0.20 max. 0.30 max. 1.20 max. 0.50 max. 1.00 max. 0.03 max. 0.03 max. 0.60 max. 0.10 max.
Typical Result 0.0002 max. 0.12-0.20 0.01-0.05 0.59-0.97 0.09-0.20 0.60-1.00 0.01 max. 0.01 0.09-0.23 0.01

TYPICAL OPERATING PROCEDURES

Classification⁽²⁾ Polarity⁽¹⁾ Current
Amps
4.0 mm (5/32 in) DC+ 100-165
3/16 in DC+ 125-205
5.0 mm DC+ 130-210

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.
⁽²⁾ Size 3/16 in. is manufactured to US standard units