DETAILS
A copper coated, mild steel, engineered alloy MIG wire that leads the industry in arc performance, wire feedability and consistency, as well as extending contact tip life.
Features
- Engineered alloy system enhances silicon island management
- Minimal spatter
- Copper coated for long contact tip life
- Fast travel speeds
- MicroGuard® Ultra provides superior feeding and arc stability
Typical Applications
- Robotic or hard automation
- Automotive
- Pipeline & Offshore
- Pressure vessels
- Heavy fabrication
Welding Positions
- All
Shielding Gas
- Mixed Shielding Gas|100% CO2
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
CONFORMANCES | SPECIFICATION | CLASSIFICATION |
---|---|---|
AWS | AWS A5.18 | ER70S-6 |
ABS | ABS - Part 2 | 3YSA H5 |
BV | BV - Chapter 5 | SA3YHHH |
CWB | CSA W48 | B-G 49A 3 C1 S6, B-G 49A 3 C1 S6 (B-G 49A 3 C G6) |
DNV-GL | DNV - 2.9 | III Y40MS H5 |
DB | ISO 14341-A | G 42 3 C1 3Si1, G 46 4 M21 3Si1 |
LR | LR - Chapter 11 | 3YS H5 |
MIL | MIL-E-23765/1D | MIL-70S-6 |
MECHANICAL PROPERTIES
Classification | Shielding Gas | Polarity |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) |
---|---|---|---|---|---|---|---|
ER70S-6 Requirement | 100% CO2 | DC+ | 400 (58) min. | 480 (70) min. | 22 min. | 27 (20) min. | |
Typical Result, As-welded | 100% CO2 | DC+ | 430 (62) | 540-580 (78-83) | 24 | 33-89 (24-66) | |
Typical Result, As-welded | 90% Ar, 10% CO2 | DC+ | 500 (72) | 610 (88) | 23 | 80-91 (59-67) |
WIRE COMPOSITION
Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V | %Total Cu |
---|---|---|---|---|---|---|---|---|---|---|
ER70S-6 Requirement | 0.06 - 0.15 | 0.15 max. | 1.40 - 1.85 | 0.15 max. | 0.15 max. | 0.025 max. | 0.035 max. | 0.80 - 1.15 | 0.03 max. | 0.50 max. |
Typical Result | 0.07-0.10 | 0.02-0.05 | 1.42-1.49 | 0.01 | 0.01-0.02 | 0.005-0.010 | 0.017-0.027 | 0.81-0.89 | 0.005 max. | 0.12-0.23 |
TYPICAL OPERATING PROCEDURES
Diameter | Transfer Mode | Shielding Gas | Polarity |
CTWD
mm (in.)⁽¹⁾ |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
Melt-off Rate
kg/hr (lb/hr) |
---|---|---|---|---|---|---|---|---|
0.035 in (0.9 mm) | Short Circuit Transfer ⁽²⁾ | 75% Ar / 25% CO2 | DC+ | 12 (1/2) | 2.5 (100) | 17 | 80 | 0.7 (1.6) |
0.035 in (0.9 mm) | Short Circuit Transfer ⁽²⁾ | 75% Ar / 25% CO2 | DC+ | 12 (1/2) | 3.8 (150) | 18 | 120 | 1.1 (2.4) |
0.035 in (0.9 mm) | Short Circuit Transfer ⁽²⁾ | 75% Ar / 25% CO2 | DC+ | 12 (1/2) | 6.4 (250) | 20 | 175 | 1.8 (4.0) |
0.035 in (0.9 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 19 (3/4) | 9.5 (375) | 23 | 195 | 2.7 (6.0) |
0.035 in (0.9 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 19 (3/4) | 12.7 (500) | 29 | 230 | 3.6 (8.0) |
0.035 in (0.9 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 19 (3/4) | 15.2 (600) | 30 | 275 | 4.4 (9.6) |
0.045 in (1.1 mm) | Short Circuit Transfer ⁽²⁾ | 75% Ar / 25% CO2 | DC+ | 12 (1/2) | 3.2 (125) | 18 | 145 | 1.5 (3.4) |
0.045 in (1.1 mm) | Short Circuit Transfer ⁽²⁾ | 75% Ar / 25% CO2 | DC+ | 12 (1/2) | 3.8 (150) | 19 | 165 | 1.8 (4.0) |
0.045 in (1.1 mm) | Short Circuit Transfer ⁽²⁾ | 75% Ar / 25% CO2 | DC+ | 12 (1/2) | 5.1 (200) | 20 | 200 | 2.4 (5.4) |
0.045 in (1.1 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 19 (3/4) | 8.9 (350) | 27 | 285 | 4.2 (9.2) |
0.045 in (1.1 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 19 (3/4) | 12.1 (475) | 30 | 335 | 5.7 (12.5) |
0.045 in (1.1 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 19 (3/4) | 12.7 (500) | 30 | 340 | 6.0 (13.2) |
0.052 in (1.3 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 19 (3/4) | 7.6 (300) | 30 | 300 | 4.8 (10.6) |
0.052 in (1.3 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 19 (3/4) | 8.1 (320) | 30 | 320 | 5.2 (11.5) |
0.052 in (1.3 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 19 (3/4) | 12.3 (485) | 32 | 430 | 7.8 (17.1) |
1/16 in (1.6 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 19 (3/4) | 5.3 (210) | 25 | 325 | 4.8 (10.7) |
1/16 in (1.6 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 19 (3/4) | 6.0 (235) | 27 | 350 | 5.4 (12.0) |
1/16 in (1.6 mm) | Spray Transfer | 90% Ar / 10% CO2 | DC+ | 19 (3/4) | 7.4 (290) | 28 | 430 | 6.7 (14.8) |
NOTES
Note |
---|
⁽¹⁾ CTWD (Contact Tip to Work Distance). Subtract 1/4 in. (6.4 mm) to calculate Electrical Stickout. |
⁽²⁾ Procedures in these areas are procedures for short circuiting mode using 75% Argon, 25% CO2. NOTE: For 100% CO2 procedures, add 1 to 2 volts for short circuit transfer and 2 to 3 volts for globular transfer. |