DETAILS
SuperGlaze® 5554 Magnesium Manganese alloy used for elevated temperature 150F / 65C service and as 5454 base material match.
Features
- Matching filler alloy for welding 5454 base alloys
- Matching filler alloy for welding 5454 base alloys
- Low magnesium content to closely match base material chemistry
- Moderate strength applications
Typical Applications
- Transportation
- Chemical tanks
Welding Positions
- All except vertical down
Shielding Gas
- 100% Argon Argon / Helium Mixtures Flow Rate: 30 - 50 CFH
Special Features
- Q2 Lot® Certificate - Certified Material Test Report showing actual wire composition
Service Information
Documentation
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.10 | ER5554 |
WIRE COMPOSITION
| Classification | %Be | %Mg | %Zn | %Cr | %Cu | %Fe | %Mn | %Si | %Ti |
|---|---|---|---|---|---|---|---|---|---|
| ER5554 Requirement | 0.0003 max. | 2.4 - 3.0 | 0.25 max. | 0.05 - 0.20 | 0.10 max. | 0.40 max. | 0.50 - 1.0 | 0.25 max. | 0.05 - 0.20 |
| Typical Result | 0.0002 max. | 2.6 | 0.00 | 0.08 | 0.01 | 0.13 | 0.7 | 0.06 | 0.09 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas |
Gas Flow
L/min (CFH) |
Polarity |
CTWD
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|---|---|---|
| 0.9 mm (.035") | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 19.6 (770) | 21.6 | 185 |
| 1.2 mm (3/64") | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 12.7 (500) | 23.0 | 210 |
| 1.6 mm (1/16") | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 9.1 (360) | 24.8 | 280 |
| 2.4 mm (3/32") | 100% Ar | 85 (180) | DC+ | 19.0 (³/₄) | 8.0 (315) | 28.0 | 500 |
| 3.2 mm (1/8") | 100% Ar | 85 (180) | DC+ | 19.0 (³/₄) | 5.1 (200) | 30.3 | 535 |