Menu Close
Special Alloys Stick Electrodes Packaging

Diameters / Packaging

Diameters
 CAN 12 KG (3 x 4 KG, approx. 330 pcs)
 CAN 16.8 KG (3 x 5.6 KG, approx. 243 pcs)
3.2x350 mm CHROMET2X-32-1
4.0x450 mm CHROMET2X-40-1

CHROMET® 2X

Stick (SMAW)

CLASSIFICATIONS:
AWS A5.5 : E9018-B3 H4R
EN ISO 3580-A : E CrMo2 B 3 2 H5
EN ISO 3580-B : E 6216-2C1M

B3 alloyed steel designed for prolonged elevated temperature service up to 600°C

Diameter

Select Diameter

  • 3.2x350 mm
  • 4.0x450 mm

Package

Select Package

  • CAN 12 KG (3 x 4 KG, approx. 330 pcs)
  • CAN 16.8 KG (3 x 5.6 KG, approx. 243 pcs)

DETAILS

Stick electrode – 2¼Cr-1Mo deposit which meets specific requirements for improved temper embrittlement resistance after prolonged service at 400-600°C

Features

  • 2¼Cr-1Mo deposit which meets specific requirements for improved embrittlement resistance after prolonged service at 400-600°C
  • Relevant trace elements (P, Sn, As, Sb) are controlled to ensure low Bruscato (X) and Watanabe (J) factors
  • Basic flux, metal powder type coatings on low carbon high purity core wire
  • Recovery is about 115%

Typical Applications

  • Steam Generating Power Plant
  • Piping
  • Turbine Castings
  • Valve Bodies and Boiler Superheaters
  • Coal Liquefaction Plant and Pressure Vessels

Welding Positions

  • All position, except vertical down

Service Information

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E9018-B3 H4R
ISO ISO 3580-A E CrMo2 B 3 2 H5
ISO ISO 3580-B E 6216-2C1M

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
%
E9018-B3 H4R Requirement 530 (77) min. 620 (90) min. 17 min.
E CrMo2 B 3 2 H5 Requirement 400 (58) min. 500 (72) min. 18 min.
E 6216-2C1M Requirement 530 (77) min. 620 (90) min. 15 min.
Typical Result, Stress relieved 570 (83) 670 (97) 22

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Nb %Ni %P %S %Si %Total Cu
E9018-B3 H4R Requirement 0.05 - 0.12 2.00 - 2.50 0.90 max. 0.90 - 1.20 0.03 max. 0.03 max. 0.80 max.
E CrMo2 B 3 2 H5 Requirement 0.05 - 0.12 2.0 - 2.6 0.40 - 1.30 0.90 - 1.30 0.01 max. 0.3 max. 0.030 max. 0.025 max. 0.80 max. 0.3 max.
E 6216-2C1M Requirement 0.05 - 0.12 2.0 - 2.6 0.40 - 1.30 0.90 - 1.30 0.030 max. 0.025 max. 0.80 max.
Typical Result 0.06 2.2 0.70 1.05 0.00 0.0 0.010 0.012 0.25 0.1 max.

TYPICAL OPERATING PROCEDURES

Diameter Current
Amps
2.5 mm (3/32") 70-110
3.2 mm (1/8") 80-140
4.0 mm (5/32") 100-180
5.0 mm 140-240