MAXsa 10 Controller
Close up of MAXsa 10 controller controls
Inside of MAXsa 10 controller
MAXsa 10 controller
MAXsa 10 controller and MAXsa 22 Feed Head
MAXsa 10 controller cable input connectors

MAXsa® 10 Controller

K2814-4

ArcLink®-enabled Controller for Power Wave® AC/DC 1000® SD Systems

Input

Input

DETAILS

The MAXsa® 10 controller offers a single monitoring and control point for the entire hard automation welding system. Operators have full control over AC and DC welding parameters and easy PLC interfacing to control fixture travel, timers and other system commands.

Features

  • Severe Duty Ready - The controller is IP23 rated and ready for operation in harsh environments.
  • Pendant Box - Mount the controller in the standard protective box or remove the pendant for hand-held operation.
  • Eight Procedure Memories - Pre-set and save your optimal welding parameters for repeating applications and recall later for fast changeovers.
  • User-Friendly Controls - Clear digital display and controls make it easy to set.
  • Limit Control Apply operator procedure limits or lockout on any or all parameters.
  • Waveform Control Technology® – Allows the user to choose from a library of pre-programmed weld modes. Parameters for each mode can be adjusted within a limited range to achieve optimal balance between deposition rate and penetration.

Service Information

What's Included

  • Operators Manual

You May Also Need

Specifications

Weights & Dimensions

Dimensions (H x W x D) 381 mm x 259 mm x 102 mm (15 in x 13 in x 4 in)
Net Weight 11.3 kg (25 lbs)

Features

Machines Communication Technology ArcLink

Technical Specifications

Input Voltage 40V
Input Current 1A

Application

Typical Application Heavy Fabrication
Piping
Power Generation

Warranty

Warranty 5 Years