Menu Close
Ultracore stainless, flux-cored wire, plastic spool

Diameters / Packaging

Diameters
 33 lb Spool
0.045 in (1.1 mm) ED032204
1/16 in (1.6 mm) ED032205

UltraCore® 81Ni1C-H

Flux-Cored Gas-Shielded (FCAW-G)

CLASSIFICATIONS:
E81T1-Ni1C-JH4
E81T1-C1A4-Ni1-H4

UltraCore® 81Ni1C-H from Lincoln Electric is designed for high strength, low-alloy applications using 100% CO2 shielding gas.

Diameter

Select Diameter

  • 0.045 in (1.1 mm)
  • 1/16 in (1.6 mm)

Package

Select Package

  • 33 lb Spool

DETAILS

Designed for high strength, low-alloy applications using 100% CO2. These electrodes exhibit robust impact properties, even with a notch offset of 2.5 mm from weld centerline, as well as superior crack resistance, due to low diffusible hydrogen levels (4mL/100 grams of weld deposit max).

Features

  • Capable of producing weld deposits with impact toughness exceeding 88 - 123 J (65 - 91 ft·lbf) at -40°C (-40°F)
  • Designed for welding with 100% CO2 shielding gas
  • Premium arc performance and bead appearance
  • Meets AWS D1.8 seismic lot waiver requirements
  • ProTech® foil bag packaging
  • Notes: AWS D1.8 structural steel seismic supplement test data can be found at the Lincoln Electric Certificate Center.
  • Select packaging and diameters are available meeting Buy America & American Iron & Steel (AIS) standards.

Typical Applications

  • Bridge fabrication
  • Weathering steels
  • Offshore
  • Structural fabrication
  • NACE applications

Welding Positions

  • All

Shielding Gas

  • 100% CO2

Service Information

Documentation

You May Also Need

Magnum 400 MIG Gun

Magnum® 400 Welding Guns

K471-21
25lb plastic spool Innershield NR-305

UltraCore® 81Ni1A75-H Flux-cored (FCAW-G) Wire

ED032206
Image not found

Magnum® Contact Tip - Standard, .045 in (1.2 mm) - 10/pack

KP14-45
Magnum Gun Liner

Cable Liner .035-.045 in (0.9-1.2 mm) 15 ft (4.6 m)

KP42-4045-15
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.29 E81T1-Ni1C-JH4
AWS AWS A5.36 E81T1-C1A4-Ni1-H4
ABS ABS - Part 2 4YQ460SA H5
CWB CSA W48 E551T1-C1A4-Ni1-H4 (E551T1-Ni1C-JH4)
DNV-GL DNV - 2.9 IV Y46MS H5
LR LR - Chapter 11 4Y46S H5

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F)
E81T1-Ni1C-JH4 Requirement 100% CO2 DC+ 470 (68) min. 550-690 (80-100) 19 min. 27 (20) min.
E81T1-C1A4-Ni1-H4 Requirement 100% CO2 DC+ 470 (68) min. 550-690 (80-100) 19 min. 27 (20) min.
Typical Result, As-welded 100% CO2 DC+ 510 (74) 570-640 (83-92) 22 85-150 (63-111) 47-153 (35-113)

DEPOSIT COMPOSITION

Classification Shielding Gas Polarity %B %C %Cr %Mn %Mo %Ni %P %S %Si %V Diffusible Hydrogen
mL/100g Weld Metal
E81T1-Ni1C-JH4 Requirement 100% CO2 DC+ 0.12 max. 0.15 max. 1.50 max. 0.35 max. 0.80 - 1.10 0.030 max. 0.030 max. 0.80 max. 0.05 max. 4.0 max.
E81T1-C1A4-Ni1-H4 Requirement 100% CO2 DC+ 0.12 max. 0.15 max. 1.75 max. 0.35 max. 0.80 - 1.10 0.030 max. 0.030 max. 0.80 max. 0.05 max. 4 max.
Typical Result 100% CO2 DC+ 0.0050-0.006 0.04-0.05 0.04-0.06 1.12-1.42 0.01 0.81-1.00 0.012 max. 0.010 max. 0.24-0.35 0.02-0.03 1.7-3.2

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾ 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 4.4 (175) 23-28 140 1.8 (4.0) 1.6 (3.5) 86-88
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 5.1 (200) 24-29 150 2.1 (4.6) 1.8 (4.0) 86-88
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 6.4 (250) 25-30 165 2.6 (5.7) 2.3 (5.0) 86-88
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 7.6 (300) 25-30 190 3.1 (6.8) 2.7 (6.0) 86-88
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 8.9 (350) 26-31 205 3.6 (8.0) 3.2 (7.0) 86-88
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 9.5 (375) 26-31 225 3.9 (8.6) 3.4 (7.5) 86-88
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 10.8 (425) 27-32 245 4.4 (9.7) 3.8 (8.5) 86-88
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 12.1 (475) 28-33 265 4.9 (10.8) 4.3 (9.5) 86-88
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 12.7 (500) 29-34 275 5.2 (11.4) 4.5 (10.0) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 3.8 (150) 23-28 150 2.0 (4.5) 1.8 (3.9) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 4.7 (185) 24-29 165 2.5 (5.5) 2.2 (4.8) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 5.7 (225) 24-29 190 3.1 (6.7) 2.7 (5.9) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 6.4 (250) 25-30 215 3.4 (7.5) 2.9 (6.5) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 7.0 (275) 25-30 235 3.7 (8.2) 3.2 (7.2) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 7.6 (300) 26-31 255 4.1 (9.0) 3.5 (7.8) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 8.5 (335) 26-31 275 4.5 (10.0) 4.0 (8.7) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 9.5 (375) 27-32 295 5.1 (11.2) 4.4 (9.8) 86-88
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 10.2 (400) 27-34 310 5.4 (12.0) 4.7 (10.4) 86-88
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 3.8 (150) 24-29 200 2.9 (6.3) 2.5 (5.5) 86-88
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 4.4 (175) 24-30 210 3.3 (7.4) 2.9 (6.4) 86-88
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 5.1 (200) 25-30 235 3.8 (8.4) 3.3 (7.3) 86-88
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 5.7 (225) 25-31 265 4.3 (9.5) 3.7 (8.2) 86-88
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 6.4 (250) 26-31 285 4.8 (10.5) 4.2 (9.2) 86-88
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 7.0 (275) 26-32 305 5.3 (11.6) 4.6 (10.1) 86-88
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 8.3 (325) 27-32 335 6.2 (13.7) 5.4 (11.9) 86-88
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 8.9 (350) 28-34 365 6.7 (14.7) 5.8 (12.8) 86-88

NOTES

Note
⁽¹⁾ To estimate ESO, subtract 1/4 in. (6.0 mm) from CTWD.
NOTE 1: FEMA and AWS D1.8 structural steel seismic supplement test data can be found on this product at www.lincolnelectric.com.
NOTE 2: This product contains micro-alloying elements. Additional information available upon request.