DETAILS
EXCALIBUR® 312-16 provides a high tensile strength weld deposit that offers some resistance to abrasion. The weld deposit work-hardens and allows for good wear resistance.
Features
- Can be used for joining hard to weld materials and dissimilar metals
- Applications should be limited to 800°F (420°C)
- The weld deposits exhibit high tensile strength and offer some resistance to abrasion
- Weld deposits work-hardens and allows for good wear resistance
Disclaimers
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.4 | E312-16 |
MECHANICAL PROPERTIES
| Classification |
Tensile Strength
MPa (ksi) |
Elongation
% |
|---|---|---|
| E312-16 Requirement | 660 (95) min. | 22 min. |
| Typical Result, As-welded | 740-810 (107-117) | 22-23 |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %Ni | %P | %S | %Si | Ferrite Number (per AWS A4.2) |
|---|---|---|---|---|---|---|---|---|---|---|
| E312-16 Requirement | 0.15 max. | 28.0 - 32.0 | 0.75 max. | 0.5 - 2.5 | 0.75 max. | 8.0 - 10.5 | 0.04 max. | 0.03 max. | 1.00 max. | |
| Typical Result | 0.12 | 28.6-29.3 | 0.09 | 1.2-1.3 | 0.22 | 9.8-10.0 | 0.03 | 0.00 | 0.48-0.58 | 42-44 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Current
Amps |
|---|---|---|
| 3/32 in (2.4 mm) | DC+ | 40-80 |
| 3/32 in (2.4 mm) | AC | 40-80 |
| 1/8 in (3.2 mm) | DC+ | 75-110 |
| 1/8 in (3.2 mm) | AC | 75-110 |
| 5/32 in (4.0 mm) | DC+ | 95-150 |
| 5/32 in (4.0 mm) | AC | 95-150 |
| 3/16 in (4.8 mm) | DC+ | 130-200 |
| 3/16 in (4.8 mm) | AC | 130-200 |