Menu Close
Excalibur 7018-A1 MR

Diameters / Packaging

Diameters
 8 lb (3.6 kg) Easy Open Can
 10 lb (4.5 kg) Easy Open Can
1/8 x 14 in (3.2 x 355 mm) ED035010
3/32 x 12 in (2.4 x 305 mm) ED036502
5/32 x 14 in (4.0 x 355 mm) ED035011

Excalibur® 385-16 Stick (SMAW) Electrode

Stick (SMAW) | ED035011

CLASSIFICATIONS:
AWS A5.4 : E385-16

EXCALIBUR® 385-16 is fully austentic metal designed for welding 904L Stainless Steels with Minimal heat input welding procedures should be used to avoid solidification cracking for all welding positions, except vertical down (Stainless)

Diameter

Select Diameter

  • 1/8 x 14 in (3.2 x 355 mm)
  • 3/32 x 12 in (2.4 x 305 mm)
  • 5/32 x 14 in (4.0 x 355 mm)

Package

Select Package

  • 10 lb (4.5 kg) Easy Open Can
Buy Now

DETAILS

EXCALIBUR® 385-16 requires minimal heat input welding procedures be used to avoid solidification cracking. Often used in fabrication of equipment and vessels for handling and storage of sulfuric acid and phosphoric acid.

Features

  • The weld metal is fully austenitic
  • Minimal heat input welding procedures should be used to avoid solidification cracking
  • These materials are used in fabrication of equipment and vessels for handling and storage of sulfuric acid and phosphoric acid

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.4 E385-16

MECHANICAL PROPERTIES

Classification Tensile Strength
MPa (ksi) 		Elongation
%
E385-16 Requirement 520 (75) min. 30 min.
Typical Result, As-welded 570-590 (83-86) 40-41

DEPOSIT COMPOSITION

Classification %C %Cr %Cu %Mn %Mo %Ni %P %S %Si
E385-16 Requirement 0.03 max. 19.5 - 21.5 1.2 - 2.0 1.0 - 2.5 4.2 - 5.2 24.0 - 26.0 0.03 max. 0.02 max. 0.90 max.
Typical Result 0.03 20.2 1.9 1.3 4.9 25.2 0.03 0.00 0.31

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 40-80
3/32 in (2.4 mm) AC 40-80
1/8 in (3.2 mm) DC+ 75-110
1/8 in (3.2 mm) AC 75-110
5/32 in (4.0 mm) DC+ 95-150
5/32 in (4.0 mm) AC 95-150
3/16 in (4.8 mm) DC+ 130-200
3/16 in (4.8 mm) AC 130-200

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.