Menu Close
Lincoln Stainless Cut Length TIG Electrode

Diameters / Packaging

Diameters
 10 lb (4.5 kg) Plastic Tube
1/8 in (3.2 mm) ED034929
1/16 in (1.6 mm) ED034927
3/32 in (2.4 mm) ED034928

Lincoln® ER316/316LCF TIG (GTAW) Cut Lengths

TIG (GTAW) | ED034928

CLASSIFICATIONS:
AWS ER316/ER316L

LINCOLN® ER316/316LCF Tungsten Inert Gas Rod designed for 316L stainless steel base metals where controlled ferrite levels are required.

Diameter

Select Diameter

  • 1/8 in (3.2 mm)
  • 1/16 in (1.6 mm)
  • 3/32 in (2.4 mm)

Package

Select Package

  • 10 lb (4.5 kg) Plastic Tube
Buy Now

DETAILS

LINCOLN® ER316/316LCF provides controlled low ferrite (FN 3-6), Charpy V-Notch test results capable of exceeding 27 J (20 ft•lbf) @ -196°C (-320°F) and Exceeds 15 mils (0.38 mm) of lateral expansion @ -196°C (-320°F).

Features

  • Controlled Low Ferrite (Range 3-6)
  • Charpy V-Notch test results capable of exceeding 27 J (20 ft•lbf) @ -196°C (-320°F)
  • Exceeds 15 mils (0.38 mm) of lateral expansion at -196°C (-320°F)
  • Batch Managed Inventory
  • Ink jet printing identification on entire length of electrode
  • Q2 Lot® - Certificates showing actual wire composition, ferrite number, and impact properties tested at -196°C (-320°F) available online

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.9 ER316, ER316L

MECHANICAL PROPERTIES

Classification Shielding Gas Elongation
% 		Tensile Strength
MPa (ksi) 		Yield Strength @ 0.2% Offset
MPa (ksi) 		Charpy V-Notch
J (ft-lbs) @ -196°C (-320°F) 		Lateral Expansion
mil @ -196 °C (-320 °F)
Typical Result 100% Ar 37 600 (87) 450 (65) 50-115 (37-85) 30-54

WIRE COMPOSITION

Classification %C %Cr %Cu %Mn %Mo %N %Nb %Ni %P %S %Si Ferrite Number (Delong ©) Ferrite Number (WRC-1992 ©)
ER316 Requirement 0.08 max. 18.0 - 20.0 0.75 max. 1.0 - 2.5 2.0 - 3.0 Info. Only Info. Only 11.0 - 14.0 0.03 max. 0.03 max. 0.30 - 0.65 Info. Only Info. Only
ER316L Requirement 0.03 max. 18.0 - 20.0 0.75 max. 1.0 - 2.5 2.0 - 3.0 Info. Only Info. Only 11.0 - 14.0 0.03 max. 0.03 max. 0.30 - 0.65 Info. Only Info. Only
Typical Result 0.01-0.02 18.3-18.5 0.08-0.18 1.7-1.8 2.5-2.6 0.06 0.01 max. 12.3-13.2 0.02 0.01-0.02 0.34-0.47 4-7 4-5