Lincoln Stainless Cut Length TIG Electrode

Diameters / Packaging

Diameters
10 lb (4.5 kg) Plastic Tube
1/8 in (3.2 mm) ED037065
1/16 in (1.6 mm) ED037064
3/32 in (2.4 mm) ED037066
5/32 in (4.0 mm) ED037067

Lincoln® ER316Si/316LSi TIG (GTAW) Cut Lengths

TIG (GTAW) | ED037066

CLASSIFICATIONS:
AWS ER316Si
ER316LSi

LINCOLN® ER316Si/316LSi Tungsten Inert Gas Rod is an austenitic stainless steel rod designed for welding 316 or 316L stainless, the increased silicon content allows for better puddle fluidity.

DETAILS

LINCOLN® ER316Si/316LSi provides higher silicon for increased puddle fluidity and better wetting at the toes of the weld, while the Molybdenum grade gives higher corrosion resistance.

Features

  • High silicon level for increased puddle fluidity and wetting out at the toes
  • Molybdenum grade for increased corrosion resistance
  • Solid rod with low carbon for welding stainless CrNiMo steels
  • Ink jet printing identification on entire length of electrode
  • Q2 Lot® Tested - A certificate showing actual wire composition and calculated ferrite number (FN) is available online

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.9 ER316LSi, ER316Si

WIRE COMPOSITION

Classification %C %Cr %Cu %Mn %Mo %N %Nb %Ni %P %S %Si Ferrite Number (Delong ©) Ferrite Number (WRC-1992 ©)
ER316LSi Requirement 0.03 max. 18.0 - 20.0 0.75 max. 1.0 - 2.5 2.0 - 3.0 Info. Only Info. Only 11.0 - 14.0 0.03 max. 0.03 max. 0.65 - 1.00 Info. Only Info. Only
ER316Si Requirement 0.08 max. 18.0 - 20.0 0.75 max. 1.0 - 2.5 2.0 - 3.0 Info. Only Info. Only 11.0 - 14.0 0.03 max. 0.03 max. 0.65 - 1.00 Info. Only Info. Only
Typical Result 0.01 18.2 0.08 1.6 2.3 0.07 0.01 11.3 0.02 0.01 0.76 9 7