Détails
BLUE MAX® MIG 308LCF ideal for applications in cryogenic temperatures requiring specific lateral expansion and charpy values at low temperatures of -196°C (-320°F)
Traits
- Q2 Lot® - Certified Material Test Report showing actual wire composition, actual impact properties, Country of Origin and calculated ferrite number (FN) of each lot is available online in the Certificate Center
- Proprietary surface lubricant for steady feeding and arc stability leading to exceptional performance at high wire feed speeds
- Controlled Low Ferrite (Range 3-6 FN)
- Charpy V-Notch test results capable of exceeding 27 J (20 ft•lbf) @ -196°C (-320°F)
Applications typiques
- LNG Storage
- Cryogenic vessels and piping
Positions de soudage
- All
Gaz de protection
- 98% Ar / 2% O₂
Disclaimers
Des informations de service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
CONFORMANCES | SPECIFICATION | CLASSIFICATION |
---|---|---|
AWS | AWS A5.9 | ER308, ER308L |
MECHANICAL PROPERTIES
Classification | Shielding Gas |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -196°C (-320°F) |
Lateral Expansion
mil @ -196 °C (-320 °F) |
---|---|---|---|---|---|---|
Typical Result, As-welded | 98% Ar, 2% O2 | 390 (57) | 570 (82) | 39 | 43-59 (32-43) | 19-32 |
WIRE COMPOSITION
Classification | %C | %Cr | %Cu | %Mn | %Mo | %N | %Nb | %Ni | %P | %S | %Si | Ferrite Number (Delong ©) | Ferrite Number (WRC-1992 ©) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ER308 Requirement | 0.08 max. | 19.5 - 22.0 | 0.75 max. | 1.0 - 2.5 | 0.75 max. | Info. Only | Info. Only | 9.0 - 11.0 | 0.03 max. | 0.03 max. | 0.30 - 0.65 | Info. Only | Info. Only |
ER308L Requirement | 0.03 max. | 19.5 - 22.0 | 0.75 max. | 1.0 - 2.5 | 0.75 max. | Info. Only | Info. Only | 9.0 - 11.0 | 0.03 max. | 0.03 max. | 0.30 - 0.65 | Info. Only | Info. Only |
Typical Result | 0.02-0.03 | 19.5-20.1 | 0.02-0.20 | 1.7-1.8 | 0.18 max. | 0.06-0.10 | 0.03 max. | 10.6-11.0 | 0.01-0.02 | 0.01-0.02 | 0.34-0.48 | 3-5 | 4-6 |
TYPICAL OPERATING PROCEDURES
Diameter | Shielding Gas |
Voltage
volts |
Approx. Current
amps |
---|---|---|---|
.035" (0.9 mm) | 98% Ar, 2% O2 | 26-29 | 160-210 |
.045" (1.1 mm) | 98% Ar, 2% O2 | 28-32 | 180-250 |