Détails
Blue Max® MIG wire is designed to perform exceptionally at high wire feed speeds
Traits
- Similar to 309L with the exception for the addition of 2.0 - 3.0% molybdenum to increase its pitting corrosion resistance in halide-containing environments
- Surfacing (buffer layer) of base metals to improve their resistance to corrosion
- Used to achieve a single-layer overlay with a chemical composition similar to that of a 316L stainless steel
Applications typiques
- General Fabrication
- Process Industries
- Used for the first layer of multiple-layer overlays with filler metals such as 316L or 317L stainless steel
Positions de soudage
- All
Gaz de protection
- 98% Ar/ 2% O2
Disclaimers
Des informations de service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| ISO | ISO 14343-A | G 23 12 2 L |
WIRE COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %N | %Ni | %P | %S | %Si | Ferrite Number (Delong ©) | Ferrite Number (WRC-1992 ©) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| G 23 12 2 L Requirement | 0.03 max. | 21.0 - 25.0 | 0.5 max. | 1.0 - 2.5 | 2.0 - 3.5 | 11.0 - 15.5 | 0.03 max. | 0.02 max. | 1.0 max. | |||
| Typical Result | 0.01 | 21.5 | 0.1 | 1.4 | 2.5 | 0.06 | 14.9 | 0.02 | 0.003 max. | 0.3 | 11.5 | 9.1 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|
| 0.035 in (0.9 mm) | 98% Ar / 2% O2 | 26-29 | 160-210 |
| 0.045 in (1.1 mm) | 98% Ar / 2% O2 | 28-32 | 180-250 |
| 0.062 in (1.6 mm) | 98% Ar / 2% O2 | 29-33 | 200-280 |