Détails
BLUE MAX® MIG 385 ideal for use in process piping fabrication of equipment and vessels for handling and storage of sulfuric acid, phosphoric acid, and other inorganic and organic acids.
Traits
- Q2 Lot® - Certified Material Test Report showing actual wire composition and Country of Origin of each lot is available online in the Certificate Center
- Proprietary surface lubricant for steady feeding and arc stability leading to exceptional performance at high wire feed speeds
- Super austenitic stainless steel provides resistance to stress corrosion cracking
- Low heat input procedures needed
Applications typiques
- Maintenance and Repair
- Process Industries
- Process Piping
Positions de soudage
- All
Gaz de protection
- 98% Ar / 2% O₂
Disclaimers
Des informations de service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.9 | ER385 |
| CWB | CSA W48 | ER385 |
WIRE COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %N | %Nb | %Ni | %P | %S | %Si |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ER385 Requirement | 0.025 max. | 19.5 - 21.5 | 1.2 - 2.0 | 1.0 - 2.5 | 4.2 - 5.2 | 24.0 - 26.0 | 0.02 max. | 0.03 max. | 0.50 max. | ||
| Typical Result | 0.011-0.013 | 19.9-20.3 | 1.3-1.5 | 1.6-1.8 | 4.2-4.5 | 0.05 | 0.01 max. | 25.1-25.2 | 0.01-0.02 | 0.003 max. | 0.32-0.34 |