Détails
EXCALIBUR® 410-16 is great for overlay on carbon and low alloy steels, should be used with preheat and interpass temperatures greater than 400°F (200°C) during welding operations.
Traits
- Preheat and interpass temperatures greater than 400°F (200°C) are recommended during welding
- Great for overlay on carbon and low alloy steels
- Welding 410 and 410s Stainless Steels
Applications typiques
- Surfacing Steel Mill Rolls
- Furnace and Burner Parts
- Turbine Parts
- Welding 410 and 410s Stainless Steels
Positions de soudage
- All except vertical down
Gaz de protection
- N/A
Disclaimers
Des informations de service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.4 | E410-16 |
MECHANICAL PROPERTIES
| Classification |
Tensile Strength
MPa (ksi) |
Elongation
% |
|---|---|---|
| E410-16 Requirement | 520 (75) min. | 20 min. |
| Typical Result, 1 hour @ 745°C (1375°F) | 680-700 (99-101) | 21-22 |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %Ni | %P | %S | %Si |
|---|---|---|---|---|---|---|---|---|---|
| E410-16 Requirement | 0.12 max. | 11.0 - 13.5 | 0.75 max. | 1.0 max. | 0.75 max. | 0.7 max. | 0.04 max. | 0.03 max. | 0.90 max. |
| Typical Result | 0.09-0.10 | 12.8-13.1 | 0.11-0.14 | 0.7-0.9 | 0.03 | 0.2-0.3 | 0.04 | 0.01 | 0.36-0.39 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity⁽¹⁾ |
Current
Amps |
|---|---|---|
| 3/32 in (2.4 mm) | DC+ | 40-80 |
| 3/32 in (2.4 mm) | AC | 40-80 |
| 1/8 in (3.2 mm) | DC+ | 75-110 |
| 1/8 in (3.2 mm) | AC | 75-110 |
| 5/32 in (4.0 mm) | DC+ | 95-150 |
| 5/32 in (4.0 mm) | AC | 95-150 |
| 3/16 in (4.8 mm) | DC+ | 130-200 |
| 3/16 in (4.8 mm) | AC | 130-200 |
NOTES
| Note |
|---|
| ⁽¹⁾ Preferred polarity is listed first. |