Détails
Traits
- Operable with low amperage on sheet metal
- Excellent bead appearance
- Slag control accommodates vertical down welding
Applications typiques
- Maintenance or repair welding
- For use with small AC welders with low OCV
- Sheet metal
- Irregular short welds that change positions
Positions de soudage
- All
Gaz de protection
- Not Applicable
Caractéristiques spéciales
- Retail Small Packaging (RSP). All RSP products carry AWS compliance. Unlike the standard products, RSP products have no other agencies approvals.
Disclaimers
Des informations de service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.1 | E6013 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -18°C (0°F) |
|---|---|---|---|---|
| E6013 Requirement | 330 (48) min. | 410 (60) min. | 17 min. | |
| Typical Result, As-welded | 420-430 (61-63) | 480-490 (70-71) | 27-28 | 16-91 (12-67) |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V |
|---|---|---|---|---|---|---|---|---|---|
| E6013 Requirement | 0.20 max. | 0.20 max. | 1.20 max. | 0.30 max. | 0.30 max. | 1.00 max. | 0.08 max. | ||
| Typical Result | 0.04-0.05 | 0.02-0.04 | 0.36-0.44 | 0.01 | 0.03-0.05 | 0.009-0.012 | 0.006-0.011 | 0.16-0.23 | 0.01 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity⁽¹⁾ |
Current
Amps |
|---|---|---|
| 3/32" (2.4 mm) | AC | 75-115 |
| 3/32" (2.4 mm) | DC± | 70-105 |
| 1/8" (3.2 mm) | AC | 110-140 |
| 1/8" (3.2 mm) | DC± | 100-135 |
| 5/32" (4.0 mm) | AC | 160-200 |
| 5/32" (4.0 mm) | DC± | 145-180 |
NOTES
| Note |
|---|
| ⁽¹⁾ Preferred polarity is listed first. |