Menu Close
Excalibur Stick Electrode

Diameters / Packaging

Diameters
 10CPL (40CT)
 50 lb Easy Open Can
1/8 x 14 in (3.2 x 350 mm) ED038110
3/32 x 12 in (2.4 x 300 mm) ED038109
5/32 x 14 in (4.0 x 350 mm) ED031738

Lincoln® 7018 AC

Stick (SMAW)

AWS:
E7018 H8

Mild Steel, Low Hydrogen • AWS E7018 H8

Diamètre

Sélectionnez le diamètre

  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/32 x 12 in (2.4 x 300 mm)
  • 5/32 x 14 in (4.0 x 350 mm)

Paquet

Sélectionnez un forfait

  • 10CPL (40CT)
  • 50 lb Easy Open Can
Acheter maintenant

Détails

Traits

  • capable of cold re-strike
  • Low open circuit voltage operation
  • Minimal spatter

Applications typiques

  • General fabrication
  • Tack and skip welds
  • Thin section

Positions de soudage

  • All except vertical down

Gaz de protection

  • Not Applicable

Caractéristiques spéciales

  • AC polarity welding

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

K2394-1-Stick Electrode Holder & Cable Assembly Kit

Stick Electrode Holder and Cable Assembly (Twist Mate™)

K2394-1
Red Line Premium Leather MIG Stick Welding Gloves

Premium Leather MIG Stick Welding Gloves - Large

K2980-L
Heavy Duty Leather Welding Jacket

Heavy Duty Leather Welding Jacket - Large

K2989-L

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E7018, E7018-H8
CWB CSA W48 E4918-H8

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) 		Hardness Rockwell B
E7018-H8 Requirement 400 (58) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 460-580 (66-84) 550-660 (79-95) 22-34 27-136 (20-100) 85-95

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V %Mn+Ni+Cr+Mo+V Diffusible Hydrogen
mL/100g Weld Metal 		1800F H2O - As received
E7018-H8 Requirement 0.15 max. 0.20 max. 1.60 max. 0.30 max. 0.30 max. 0.035 max. 0.035 max. 0.75 max. 0.08 max. 1.75 max. 8 max. 0.6 max.
Typical Result 0.04-0.08 0.02-0.04 0.93-1.59 0.02 max. 0.01-0.03 0.011-0.019 0.005-0.016 0.28-0.46 0.02-0.03 1.00-1.67 3-7 0.2 max.

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) AC 75-120
3/32 in (2.4 mm) DC+ 70-115
1/8 in (3.2 mm) AC 105-150
1/8 in (3.2 mm) DC+ 100-140
5/32 in (4.0 mm) AC 130-200
5/32 in (4.0 mm) DC+ 120-185

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.

Modèles associés

00022856.jpg

1/8X14 LINCOLN 7018 AC 10CPL (40CT)

ED038110
00022856.jpg

Lincoln® 7018 AC

ED038109