Détails
LINCOLN® ER310 provides a fully austenitic weld deposit, and as such calls for minimal heat input. Typically used for stainless steels of similar composition in cast and wrought form.
Traits
- The weld deposit is fully austenitic, and as such, calls for minimal heat input during welding
- Ink jet printing identification on entire length of electrode
- Q2 Lot® - Certificate showing actual wire composition
Applications typiques
- Head shields
- Furnace parts
- Ducting
- Used for welding stainless steels of similar composition in cast and wrought forms
Positions de soudage
- All
Gaz de protection
- 100% Argon
Disclaimers
Des informations de service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.9 | ER310 |
| ABS | AWS A5.9 | ER310 |
| MIL | MIL-E-19933E AMD1 | MIL-310 |
WIRE COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %N | %Nb | %Ni | %P | %S | %Si |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ER310 Requirement | 0.08 - 0.15 | 25.0 - 28.0 | 0.75 max. | 1.0 - 2.5 | 0.75 max. | Info. Only | Info. Only | 20.0 - 22.5 | 0.03 max. | 0.03 max. | 0.30 - 0.65 |
| Typical Result | 0.11-0.12 | 25.7-26.0 | 0.02-0.06 | 1.5-1.8 | 0.07-0.09 | 0.01-0.03 | 0.01 max. | 20.9-21.2 | 0.01 | 0.003 max. | 0.36-0.39 |