Détails
LINCOLN® ER410 provides air-hardening weld deposits to impart corrosion, erosion, abrasion resistance.
Traits
- Designed to weld stainless steels of similar chemical composition as well as to overlay carbon steels to impart corrosion, erosion and abrasion resistance
- Designed to weld stainless steels of similar chemical composition as well as to overlay carbon steels to impart corrosion, erosion and abrasion resistance
- This material, being an air-hardening type, calls for a pre-heat and inter-pass temperature of 400°F (200°C) or greater during welding
- Ink jet printing identification on entire length of electrode
- Q2 Lot® - Certificate showing actual wire composition
Applications typiques
- Surfacing Steel Mill Rolls
- Furnace and Burner Parts
- Turbine Parts
Positions de soudage
- All
Gaz de protection
- 100% Argon
Disclaimers
Des informations de service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.9 | ER410 |
| MIL | MIL-E-19933E AMD1 | MIL-410 |
WIRE COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %N | %Ni | %P | %S | %Si |
|---|---|---|---|---|---|---|---|---|---|---|
| ER410 Requirement | 0.12 max. | 11.5 - 13.5 | 0.75 max. | 0.6 max. | 0.75 max. | Info. Only | 0.6 max. | 0.03 max. | 0.03 max. | 0.5 max. |
| Typical Result | 0.08-0.12 | 11.9-12.3 | 0.03-0.09 | 0.4-0.5 | 0.02-0.03 | 0.01-0.04 | 0.1-0.2 | 0.02 | 0.003 max. | 0.3-0.4 |