Menu Close
Lincoln ER70S-2 or ER70S-6 mild steel TIG Wires

Diameters / Packaging

Diameters
 10 lb (4.5 kg) Plastic Tube
1/16 in (1.6 mm) ED035247
3/32 in (2.4 mm) ED035248

Lincoln® ER410NiMo

TIG (GTAW)

AWS:
AWS ER410NiMo

LINCOLN® ER410NiMo Tungsten Inert Gas Rod designed for use to overlay mild and low alloy steels.

Diamètre

Sélectionnez le diamètre

  • 1/16 in (1.6 mm)
  • 3/32 in (2.4 mm)

Paquet

Sélectionnez un forfait

  • 10 lb (4.5 kg) Plastic Tube
Acheter maintenant

Détails

LINCOLN® ER410NiMo provides high nickel-molybdenum weld deposits for overlay on mild and low alloy steels.

Traits

  • Used to overlay mild and low alloy steels
  • Preheat and inter-pass temperatures of 300°F (150°C) or greater is recommended during welding
  • Post-weld heat treatment should not exceed 1150°F (620°C) as higher temperatures may result in hardening
  • Ink jet printing identification on entire length of electrode
  • Q2 Lot® - Certificate showing actual wire composition

Applications typiques

  • Turbines
  • Valve Bodies
  • High Pressure Piping
  • Offshore
  • Power Generation

Positions de soudage

  • All

Gaz de protection

  • 100% Argon

Caractéristiques spéciales

  • Designed to weld materials of similar chemical composition in cast and wrought forms

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.9 ER410NiMo

WIRE COMPOSITION

Classification %C %Cr %Cu %Mn %Mo %N %Nb %Ni %P %S %Si
ER410NiMo Requirement 0.06 max. 11.0 - 12.5 0.75 max. 0.6 max. 0.4 - 0.7 Info. Only Info. Only 4.0 - 5.0 0.03 max. 0.03 max. 0.5 max.
Typical Result 0.02-0.03 11.8-12.1 0.04-0.06 0.4-0.5 0.5-0.6 0.02-0.05 0.00 max. 4.5-4.7 0.01-0.02 0.01 max. 0.4