Détails
LINCORE® SUPER RAIL™ provides low material distortion on severe impact, removes slag easily with hand tools and work hardens faster without cracking for consistent wire feeding with next generation lubrication technology.
Traits
- Reduce carbon steel repairs by 50%.
- Consistent wire feeding with next generation lubrication
- Low material distortion on impact
- Work hardens faster without cracking
Applications typiques
- Rail Ends/Points
- Rail Crossing Points
Positions de soudage
- Flat/Horizontal
Disclaimers
Des informations de service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
DEPOSIT COMPOSITION
| Classification | %Al | %C | %Cr | %Mn | %Mo | %Ni | %Si |
|---|---|---|---|---|---|---|---|
| Typical Result | 3.0 max. | 1.0 max. | 5.0 max. | 5.0 max. | 1.0 max. | 3.0 max. | 2.0 max. |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
ESO
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
Deposition Rate
kg/hr (lb/hr) |
|---|---|---|---|---|---|---|
| 5/64 in (2.0 mm) | DC+ | 37 (1 1/2) | 3.2 (125) | 24 | 218 | 7.0 (3.2) |
| 5/64 in (2.0 mm) | DC+ | 37 (1 1/2) | 5.1 (200) | 27 | 282 | 11.1 (5.0) |
| 5/64 in (2.0 mm) | DC+ | 37 (1 1/2) | 6.4 (250) | 30 | 327 | 13.9 (6.3) |
| 1/16 in (1.6 mm) | DC+ | 25 (1) | 5.1 (200) | 25 | 220 | 3.0 (6.7) |
| 1/16 in (1.6 mm) | DC+ | 25 (1) | 6.4 (250) | 27 | 250 | 4.0 (8.7) |
| 1/16 in (1.6 mm) | DC+ | 25 (1) | 8.3 (325) | 29 | 300 | 5.3 (11.6) |