Détails
Traits
- Light slag for minimal arc interference
- Deep penetration
- Clean, visible weld puddle
- Superior puddle control
Applications typiques
- Hot, fill and cap pass of up to X65 grade pipe
- Root pass welding of up to X80 grade pipe
Positions de soudage
- All positions
Gaz de protection
- Not Applicable
Disclaimers
Des informations de service
Vous pourriez également avoir besoin
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.5 | E7010-P1 |
| ABS | AWS A5.5 | E7010-P1 |
| CWB | CSA W48 | E4910-P1 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
|---|---|---|---|---|
| E7010-P1 Requirement | 410 (60) min. | 480 (70) min. | 22 min. | 27 (20) min. |
| Typical Result, As-welded | 430-490 (62-70) | 530-580 (76-85) | 22-29 | 27-96 (20-71) |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V |
|---|---|---|---|---|---|---|---|---|---|
| E7010-P1 Requirement | 0.20 max. | 0.30 max. | 1.20 max. | 0.50 max. | 1.00 max. | 0.03 max. | 0.03 max. | 0.60 max. | 0.10 max. |
| Typical Result | 0.08-0.16 | 0.01-0.04 | 0.43-0.53 | 0.26-0.33 | 0.01-0.04 | 0.01 | 0.01 max. | 0.06-0.18 | 0.005 max. |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Current
Amps |
|---|---|---|
| 1/8 in (3.2 mm) | DC+ | 75-130 |
| 5/32 in (4.0 mm) | DC+ | 90-185 |
| 3/16 in (4.8 mm) | DC+ | 140-225 |