Diameters / Packaging

Diameters	44 lb Spool	500 lb Accu-Trak® Drum	900 lb Accu-Trak® Drum
0.035 in (0.9 mm)	ED028635
0.045 in (1.1 mm)	ED028636	ED030695	ED034561

SuperGlide® S6

MIG (GMAW)

AWS:
ER70S-6

SuperGlide® S6 from Lincoln Electric is a premium bare, mild steel MIG wire best for welding on metals with a medium to high presence of millscale.

Partenaire commercial Lincoln Electric?

Connectez-vous pour voir votre prix

Acheter maintenant

Détails

Lincoln's premium bare, mild steel MIG wire, SuperGlide® S6 is an excellent choice for welding on metals with a medium to high presence of millscale.

Traits

Deoxidizers tolerate light mill scale
Microguard® Ultra provides superior feeding and arc stability
Bare wire reduces copper fumes
Supports short-circuiting, globular, axial spray and pulsed spray transfer

Applications typiques

Medium to heavy mill scale base material
Sheet metal to 380-485 MPa (55-70 ksi) yield strength material
Automotive repair

Positions de soudage

Gaz de protection

100% CO2|Mixed Shielding Gas

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

SuperGlide® S3 MIG (GMAW) Wire

ED028621

SuperGlide® S6

ED028636

33 lb Steel Spool Outershield MC-409 Flux-Cored Wire

Metalshield® MC-6®

ED030392

UltraCore® 71A85 Flux-cored (FCAW-G) Wire

ED031663

Voir tout

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES	SPECIFICATION	CLASSIFICATION
AWS	AWS A5.18	ER70S-6
CWB	CSA W48	B-G 49A 3 C1 S6 (B-G 49A 3 C G6)

MECHANICAL PROPERTIES

Classification	Shielding Gas	Polarity	Yield Strength @ 0.2% Offset MPa (ksi)	Tensile Strength MPa (ksi)	Elongation %	Charpy V-Notch J (ft-lbs) @ -30°C (-20°F)
ER70S-6 Requirement	100% CO2	DC+	400 (58) min.	480 (70) min.	22 min.	27 (20) min.
Typical Result, As-welded	100% CO2	DC+	470 (68)	530-580 (77-84)	26	56-112 (42-83)

WIRE COMPOSITION

Classification	%C	%Cr	%Mn	%Mo	%Ni	%P	%S	%Si	%V	%Total Cu
ER70S-6 Requirement	0.06 - 0.15	0.15 max.	1.40 - 1.85	0.15 max.	0.15 max.	0.025 max.	0.035 max.	0.80 - 1.15	0.03 max.	0.50 max.
Typical Result	0.07-0.08	0.02	1.41-1.49	0.01 max.	0.01	0.006	0.007	0.80-0.90	0.003 max.	0.02

TYPICAL OPERATING PROCEDURES

Diameter	Transfer Mode	Shielding Gas	Polarity	CTWD mm (in.)⁽¹⁾	Wire Feed Speed m/min (in/min)	Voltage volts	Approx. Current amps	Melt-off Rate kg/hr (lb/hr)
0.035 in (0.9 mm)	Short Circuit Transfer ⁽²⁾	100% CO2	DC+	9-12 (3/8-1/2)	2.5 (100)	18	80	0.7 (1.6)
0.035 in (0.9 mm)	Short Circuit Transfer ⁽²⁾	100% CO2	DC+	9-12 (3/8-1/2)	3.8 (150)	19	120	1.1 (2.4)
0.035 in (0.9 mm)	Short Circuit Transfer ⁽²⁾	100% CO2	DC+	9-12 (3/8-1/2)	6.4 (250)	22	175	1.8 (4.0)
0.035 in (0.9 mm)	Spray Transfer	90% Ar / 10% CO2	DC+	12-19 (1/2-3/4)	9.5 (375)	23	195	2.7 (6.0)
0.035 in (0.9 mm)	Spray Transfer	90% Ar / 10% CO2	DC+	12-19 (1/2-3/4)	12.7 (500)	29	230	3.6 (8.0)
0.035 in (0.9 mm)	Spray Transfer	90% Ar / 10% CO2	DC+	12-19 (1/2-3/4)	15.2 (600)	30	275	4.4 (9.6)
0.045 in (1.1 mm)	Short Circuit Transfer ⁽²⁾	100% CO2	DC+	12-19 (1/2-3/4)	3.2 (125)	19	145	1.5 (3.4)
0.045 in (1.1 mm)	Short Circuit Transfer ⁽²⁾	100% CO2	DC+	12-19 (1/2-3/4)	3.8 (150)	20	165	1.8 (4.0)
0.045 in (1.1 mm)	Short Circuit Transfer ⁽²⁾	100% CO2	DC+	12-19 (1/2-3/4)	5.1 (200)	21	200	2.4 (5.4)
0.045 in (1.1 mm)	Spray Transfer	90% Ar / 10% CO2	DC+	12-19 (1/2-3/4)	8.9 (350)	27	285	4.2 (9.2)
0.045 in (1.1 mm)	Spray Transfer	90% Ar / 10% CO2	DC+	12-19 (1/2-3/4)	12.1 (475)	30	335	5.7 (12.5)
0.045 in (1.1 mm)	Spray Transfer	90% Ar / 10% CO2	DC+	12-19 (1/2-3/4)	12.7 (500)	30	340	6.0 (13.2)

NOTES

Note
⁽¹⁾ CTWD (Contact Tip to Work Distance). Subtract 1/4 in. (6.4 mm) to calculate Electrical Stickout.
⁽²⁾ Procedures in these areas are procedures for short circuiting mode using 100% CO2. When using 75% Argon, 25% CO2 for short circuit transfer, reduce voltage by 1 to 2 volts.