Menu Fermer
Excalibur Stick Electrode

Diamètres / Emballages

Diamètres
 22,7 kg
2,4 x 300 mm (3/32 x 12 in) ED010211
3.2 x 350 mm ED010203
4.0x350 mm ED010216
4.8x350 mm ED010207

Fleetweld® 5P®

Soudage manuel à l'électrode enrobée (MMA)

CLASSIFICATION:
E6010

Mild Steel, Cellulosic • AWS E6010

Diamètre

Sélectionnez le diamètre

  • 2,4 x 300 mm (3/32 x 12 in)
  • 3.2 x 350 mm
  • 4.0x350 mm
  • 4.8x350 mm

Emballage

Sélectionnez l'emballage

  • 22,7 kg

DÉTAILS

Caractéristiques

  • Deep arc penetration
  • Light slag with minimal arc interference
  • Excellent vertical and overhead capability

Exemples d'applications

  • Cross country and in-plant pipe welding
  • Steel with moderate surface contaminants
  • Square edge butt welds
  • Welding on galvanized and specially coated steels

Positions de soudage

  • All

Gaz de protection

  • Not Applicable

Service d'information

Vous pourriez avoir également besoin de

50 lb Can of Lincoln Electric Stick Electrodes

Fleetweld® 5P

ED010207
50 lb Can of Lincoln Electric Stick Electrodes

Fleetweld® 5P

ED010211
50 lb Can of Lincoln Electric Stick Electrodes

Fleetweld® 5P

ED010216
K704-400-Amp Welding Accessory Kit

Set d'accessoires 400A

K704

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Page de recherche SDS

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E6010
ABS AWS A5.1 E6010
CWB CSA W48 E4310
LR LR - Chapter 11 3M

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
E6010 Requirement 330 (48) min. 410 (60) min. 22 min. 27 (20) min.
Typical Result, As-welded 380-470 (56-68) 460-560 (67-82) 22-32 32-118 (23-87)

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V
E6010 Requirement 0.20 max. 0.20 max. 1.20 max. 0.30 max. 0.30 max. 1.00 max. 0.08 max.
Typical Result 0.10-0.13 0.05 max. 0.35-0.60 0.01 max. 0.03 max. 0.004-0.012 0.004-0.012 0.14-0.39 0.01 max.

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 40-80
3/32 in (2.4 mm) DC- 50-85
1/8 in (3.2 mm) DC+ 70-130
1/8 in (3.2 mm) DC- 75-135
5/32 in (4.0 mm) DC+ 90-165
5/32 in (4.0 mm) DC- 100-175
3/16 in (4.8 mm) DC+ 140-225
3/16 in (4.8 mm) DC- –
7/32 in (5.6 mm) DC+ 200-275
7/32 in (5.6 mm) DC- –
1/4 in (6.4 mm) DC+ 220-325
1/4 in (6.4 mm) DC- –

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.