Submerged Arc Family

Diamètres / Emballages

Diamètres
BOBINE DE 27,2 KG
2,4 mm (3/32 in) ED031871

Lincolnweld® LA-84 (LNS 164)

Soudage arc submergé

CLASSIFICATION:
EF3

Low alloy electrode for applications where high strength and impact toughness are required. Also meets NACE requirements for Ni

DÉTAILS

A nickel-bearing electrode with 1/2% molybdenum. This electrode is used for higher strength weldements where impact properties exceeding 27 J (20 ft·lbf) at -62°C (-80°F) are required. It is suitable for use where consumables with less than 1% Ni are required.

Caractéristiques

  • A nickel-bearing electrode with 1/2% molybdenum
  • Can be used for higher strength weldments where impact properties exceeding 27 J (20 ft·lbf) at -62°C (-80°F) are required
  • Suitable for use where consumables with less than 1% Ni are required
  • Actual (Type 3.1) certificates for each lot of wire showing chemical composition are available in the certificate center of lincolnelectric.com

Positions de soudage

  • Not applicable

Gaz de protection

  • 0

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Page de recherche SDS

WIRE COMPOSITION

Classification %C %Mn %Mo %Ni %P %S %Si %Total Cu
EF3 Requirement 0.10 - 0.18 1.50 - 2.40 0.40 - 0.65 0.70 - 1.10 0.025 max. 0.025 max. 0.30 max. 0.35 max.
S3Ni1Mo Requirement 0.07 - 0.15 1.30 - 1.80 0.45 - 0.65 0.80 - 1.20 0.020 max. 0.020 max. 0.05 - 0.35
Typical Result 0.12 1.79 0.52 0.84 0.008 0.005 0.23 0.07