DÉTAILS
Conçue pour le soudage en verticale descendante des conduites sur chantiers extérieurs et en atelier.
Caractéristiques
- Haut rendement en soudage vertical descendant sur tubes
- Forte pénétration
- Bain de fusion propre et bien visible
- Conforme à la norme NACE MR0175 pour les applications de gaz acide.
- Données d’essai disponibles pour SSC (NACE TM0177)
- Electrode cellulosique
- Test data available for SSC (NACE TM0177) & HIC (NACE TM0284)
Service d'information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Page de recherche SDS
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.5 | E8010-G, E8010-P1 |
| ABS | AWS A5.5 | E8010-P1 |
| TUV | AWS A5.5 | E8010-P1 |
| CWB | CSA W48 | E5510-P1 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) |
Charpy V-Notch
J (ft-lbs) @ -45°C (-50°F) |
Hardness Rockwell B |
|---|---|---|---|---|---|---|---|
| E8010-P1 Requirement | 460 (67) min. | 550 (80) min. | 19 min. | 27 (20) min. | |||
| Typical Result, As-welded | 460-560 (67-81) | 560-680 (82-98) | 19-30 | 51-114 (38-84) | 56-88 (41-65) | 33-96 (25-71) | 88-92 |
DEPOSIT COMPOSITION
| Classification | %B | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V |
|---|---|---|---|---|---|---|---|---|---|---|
| E8010-P1 Requirement | 0.20 max. | 0.30 max. | 1.20 max. | 0.50 max. | 1.00 max. | 0.03 max. | 0.03 max. | 0.60 max. | 0.10 max. | |
| Typical Result | 0.002 max. | 0.11-0.20 | 0.01-0.05 | 0.55-0.91 | 0.09-0.21 | 0.60-1.00 | 0.01 max. | 0.01 max. | 0.09-0.36 | 0.02 max. |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Current
Amps |
|---|---|---|
| 3.2 mm (1/8 in) | DC+ | 65-120 |
| 4.0 mm (5/32 in) | DC+ | 100-165 |
| 5.0 mm (3/16 in) | DC+ | 130-210 |