DÉTAILS
Conçue pour le soudage en vertical descendante de conduites en extérieur ou en atelier.
Caractéristiques
- Q2 Lot® Control et Testé- Certificat de lot disponible en ligne.
- Excellentes propriétés de résilience sans l’adjonction intentionnel de bore.
- Un bain de soudage propre et visible
- Contrôle aisé du bain liquide
Service d'information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Page de recherche SDS
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.5 | E8010-G, E8010-P1 |
| CWB | CSA W48 | E5510-P1 |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
Charpy V-Notch
J (ft-lbs) @ -45°C (-50°F) |
Hardness Rockwell B |
|---|---|---|---|---|---|---|
| E8010-P1 Requirement | 460 (67) min. | 550 (80) min. | 19 min. | 27 (20) min. | ||
| Typical Result, As-welded | 460-540 (67-78) | 550-650 (80-94) | 19-29 | 51-114 (38-84) | 34-93 (25-69) | 86-98 |
DEPOSIT COMPOSITION
| Classification | %B | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V |
|---|---|---|---|---|---|---|---|---|---|---|
| E8010-P1 Requirement | 0.20 max. | 0.30 max. | 1.20 max. | 0.50 max. | 1.00 max. | 0.03 max. | 0.03 max. | 0.60 max. | 0.10 max. | |
| Typical Result | 0.0002 max. | 0.12-0.20 | 0.01-0.05 | 0.59-0.97 | 0.09-0.20 | 0.60-1.00 | 0.01 max. | 0.01 | 0.09-0.23 | 0.01 |
TYPICAL OPERATING PROCEDURES
| Classification⁽²⁾ | Polarity⁽¹⁾ |
Current
Amps |
|---|---|---|
| 4.0 mm (5/32 in) | DC+ | 100-165 |
| 3/16 in | DC+ | 125-205 |
| 5.0 mm | DC+ | 130-210 |
NOTES
| Note |
|---|
| ⁽¹⁾ Preferred polarity is listed first. |
| ⁽²⁾ Size 3/16 in. is manufactured to US standard units |