DÉTAILS
Caractéristiques
- enrobage solide
- Conforme à la norme NACE MR0175 pour les applications de gaz acide.
- Productivité supérieure de 80 % par rapport au soudage traditionnel de tubes en position verticale montante.
Exemples d'applications
- Fill and cap pass welding on up to X70 grade pipe
- Pipe repair
- Hot tapping
Positions de soudage
- Toutes
Gaz de protection
- Non applicable
Caractéristiques spéciales
- Q2 Lot® - Control and Tested - Lot certificate available online
Service d'information
Vous pourriez avoir également besoin de
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Page de recherche SDS
CONFORMANCE
CONFORMANCES | SPECIFICATION | CLASSIFICATION |
---|---|---|
AWS | AWS A5.5 | E8045-P2 H4R |
AllByProd | NACE | NACE Applications |
ABS | AWS A5.5 | E8045-P2 H4R |
CWB | CWB AWS A5.5 | E5545-P2-H4R (E8045-P2-H4R) |
MECHANICAL PROPERTIES
Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) |
Hardness Rockwell B |
---|---|---|---|---|---|---|
E8045-P2 H4R Requirement | 460 (67) min. | 550 (80) min. | 19 min. | 27 (20) min. | ||
Typical Result, As-welded | 470-530 (68-76) | 560-590 (81-85) | 26-30 | 54-163 (40-120) | 27-147 (20-108) | 88-91 |
DEPOSIT COMPOSITION
Classification | %B | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V |
Diffusible Hydrogen
mL/100g Weld Metal |
1800F H2O - As received | 1800F H2O - After 9 hrs at 80F/80%RH |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
E8045-P2 H4R Requirement | 0.12 max. | 0.20 max. | 0.90 - 1.70 | 0.50 max. | 1.00 max. | 0.03 max. | 0.03 max. | 0.80 max. | 0.05 max. | 4 max. | 0.2 max. | 0.4 max. | |
Typical Result | 0.005-0.008 | 0.04-0.06 | 0.03-0.05 | 1.14-1.54 | 0.02 max. | 0.01-0.03 | 0.01 | 0.01 max. | 0.43-0.60 | 0.01 | 2-4 | 0.1 max. | 0.4 max. |
TYPICAL OPERATING PROCEDURES
Diameter | Polarity |
Current
Amps |
---|---|---|
3.2 mm (1/8 in) | DC+ | 120-170 |
4.0 mm (5/32 in) | DC+ | 170-250 |
4.5 mm (11/64 in) | DC+ | 200-300 |
NOTES
Note |
---|
NOTE: This product contains micro-alloying elements. Additional information available on request. |