Menu Fermer
UltraCore 360 copper coated, seamless, flux-cored wire for FCAW-GS welding

Diamètres / Emballages

Diamètres
 15 kg BOBINE
1,1 mm (0,045 in) W000403771
1,3 mm (0,052 in) W000403772
1,6 mm (1/16 in) W000403773

UltraCore® 360® C71

Soudage fil fourré sous gaz (FCAW-G)

CLASSIFICATION:
E71T-1C-JH4
E71T1-C1A2-CS1-H4

UltraCore 360 C71 flux cored welding wire from Lincoln Electric is a mild steel, gas-shielded flux-cored wire designed to protect the flux core from environmental exposure helping to maintain low diffusible hydrogen and extend shelf life.

Diamètre

Sélectionnez le diamètre

  • 1,1 mm (0,045 in)
  • 1,3 mm (0,052 in)
  • 1,6 mm (1/16 in)

Emballage

Sélectionnez l'emballage

  • 15 kg BOBINE

DÉTAILS

UltraCore® 360™ C71 has a seamless design that protects the flux core from environmental exposure helping to maintain low diffusible hydrogen and extend shelf life.

Caractéristiques

  • Seamless design protects the flux core from environmental exposure helping to maintain low diffusible hydrogen and extend shelf life
  • Copper coating offers superior feedability and extended contact tip life
  • Low spatter and fume levels for less post-weld clean up and a better work environment
  • Low H4 diffusible hydrogen levels minimize the risk of hydrogen induced cracking
  • Premium arc performance and bead appearance

Exemples d'applications

  • Offshore
  • Shipbuilding
  • Structural
  • Oil & Gas

Positions de soudage

  • All

Gaz de protection

  • 100% CO2|Flow rate: 28-38 CFH

Service d'information

Documentation

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Page de recherche SDS

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.20 E71T-1C-JH4
AWS AWS A5.36 E71T1-C1A2-CS1-H4

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) 		Charpy V-Notch
J (ft-lbs) @ -50°C (-60°F)
E71T-1C-JH4 Requirement 100% CO2 DC+ 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
E71T1-C1A2-CS1-H4 Requirement 100% CO2 DC+ 400 (58) min. 480-660 (70-95) 22 min.
Typical Result, As-welded 100% CO2 DC+ 520 (76) 570-620 (83-90) 25 56-139 (41-102) 54-94 (40-69)

DEPOSIT COMPOSITION

Classification Shielding Gas Polarity %B %C %Mn %P %S %Si Diffusible Hydrogen
mL/100g Weld Metal
E71T-1C-JH4 Requirement 100% CO2 DC+ 0.12 max. 1.75 max. 0.03 max. 0.03 max. 0.90 max. 4.0 max.
E71T1-C1A2-CS1-H4 Requirement 100% CO2 DC+ 0.12 max. 1.75 max. 0.030 max. 0.030 max. 0.90 max. 4 max.
Typical Result 100% CO2 DC+ 0.0035-0.0047 0.08 max. 1.19-1.36 0.020 max. 0.014 max. 0.39-0.40 1-2.3

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾ 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 6.4 (250) 24-29 175 2.7 (5.9) 2.4 (5.3) 88-93
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 7.6 (300) 25-30 200 3.2 (7.0) 2.9 (6.4) 88-93
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 8.9 (350) 26-32 225 3.7 (8.2) 3.4 (7.5) 88-93
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 10.2 (400) 27-33 245 4.3 (9.4) 3.9 (8.6) 88-93
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 11.4 (450) 27-35 265 4.8 (10.6) 4.4 (9.7) 88-93
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 12.7 (500) 28-36 290 5.3 (11.7) 4.9 (10.9) 88-93
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 5.1 (200) 23-27 200 2.8 (6.2) 2.6 (5.7) 91-93
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 6.4 (250) 25-28 235 3.5 (7.7) 3.2 (7.1) 91-93
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 8.9 (350) 27-31 300 4.9 (10.8) 4.5 (10.0) 91-93
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 10.8 (425) 28-32 335 6.0 (13.1) 5.5 (12.1) 91-93
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 12.7 (500) 30-34 375 7.0 (15.4) 6.5 (14.2) 91-93
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 3.8 (150) 23-27 230 3.1 (6.7) 2.8 (6.1) 92-96
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 5.1 (200) 24-28 275 4.1 (9.0) 3.8 (8.4) 92-96
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 6.4 (250) 25-31 310 5.1 (11.3) 4.8 (10.6) 92-96
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 7.6 (300) 27-34 370 6.1 (13.5) 5.8 (12.8) 92-96
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 8.9 (350) 29-36 410 7.2 (15.8) 6.8 (15.0) 92-96

NOTES

Note
⁽¹⁾ To estimate ESO, subtract 1/4 in. (6.0 mm) from CTWD.