Menu Chiudi
SuperArc XLS

Diametri / imballo

Diametri
 44 lb Spool
 1000 lb Accu-Pak® Box
1,0 mm (0,040 in) ED037829
1,1 mm (0,045 in) ED037698
1,2 mm (0,047 in) ED037556 ED037555

SuperArc® XLS

Saldatura MIG (GMAW)

CLASSIFICAZIONI:
ISO 14341-A : G 42 3 M20 Z

Diametro

Selezionare diametro

  • 1,0 mm (0,040 in)
  • 1,1 mm (0,045 in)
  • 1,2 mm (0,047 in)

Imballo

Seleziona imballo

  • 44 lb Spool
  • 1000 lb Accu-Pak® Box

DETTAGLI

Caratteristiche

  • Minimize surface silicates for exceptionally clean weld surface
  • Reduced silicates for improved paint adhesion and increased corrosion resistance
  • Microguard® Ultra surface treatment for consistent, stable arc performance with little to no weld spatter
  • Optimized for use with Rapid X® LS mode to lower silicate island formation and spatter generation

Applicazioni tipiche

  • Fillet and lap welds on thin material, including but not limited to automotive frames, chassis and suspension components
  • Designed specifically for high speed, single pass applications

Posizioni di saldatura

  • Flat/Horizontal

Gas di schermatura

  • Mixed Shielding Gas

Informazioni sui servizi

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Pagina di ricerca SDS

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
ISO ISO 14341-A G 42 3 M20 Z

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
G 42 3 M20 Z Requirement M20 Info. Only 420 (61) min. 500-640 (72-93) 20 min. 47 (35) min.
Typical Result, As-welded 90% Ar, 10% CO2 DC+ 440 (64) 530 (77) 24 102-184 (75-136)

WIRE COMPOSITION

Classification %Al %C %Cr %Mn %Mo %Ni %P %S %Si %Total Cu %V %Ti+Zr
Typical Result 0.02 0.07 0.02 1.68 0.00 max. 0.27 0.004 0.004 0.05 0.17 0.01 0.09

TYPICAL OPERATING PROCEDURES

Diameter Transfer Mode Shielding Gas Polarity CTWD
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr)
1.2 mm (3/64") Spray Transfer 80% Ar, 20% CO2 DC+ 19 (³/₄) 3.8 (150) 24 120 2.0 (4.5)
1.2 mm (3/64") Spray Transfer 80% Ar, 20% CO2 DC+ 19 (³/₄) 8.9 (350) 29 265 4.7 (10.3)
1.2 mm (3/64") Spray Transfer 80% Ar, 20% CO2 DC+ 19 (³/₄) 14.0 (550) 32 370 7.3 (16.2)
1.2 mm (3/64") Spray Transfer 90% Ar, 10% CO2 DC+ 19 (³/₄) 3.8 (150) 23 125 2.0 (4.5)
1.2 mm (3/64") Spray Transfer 90% Ar, 10% CO2 DC+ 19 (³/₄) 8.9 (350) 28 255 4.7 (10.4)
1.2 mm (3/64") Spray Transfer 90% Ar, 10% CO2 DC+ 19 (³/₄) 14.0 (550) 32 360 7.3 (16.0)
.040" (1.0 mm) Spray Transfer 80% Ar, 20% CO2 DC+ 16 (⁵/₈) 5.6 (220) 23 105 2.1 (4.6)
.040" (1.0 mm) Spray Transfer 80% Ar, 20% CO2 DC+ 16 (⁵/₈) 8.9 (350) 26 170 3.3 (7.3)
.040" (1.0 mm) Spray Transfer 80% Ar, 20% CO2 DC+ 16 (⁵/₈) 11.4 (450) 28 210 4.2 (9.3)
.040" (1.0 mm) Spray Transfer 80% Ar, 20% CO2 DC+ 16 (⁵/₈) 15.2 (600) 30 260 5.9 (13.1)
.040" (1.0 mm) Spray Transfer 90% Ar, 10% CO2 DC+ 16 (⁵/₈) 5.6 (220) 22 105 2.2 (4.8)
.040" (1.0 mm) Spray Transfer 90% Ar, 10% CO2 DC+ 16 (⁵/₈) 8.9 (350) 25 170 3.3 (7.3)
.040" (1.0 mm) Spray Transfer 90% Ar, 10% CO2 DC+ 16 (⁵/₈) 11.4 (450) 27 210 4.2 (9.3)
.040" (1.0 mm) Spray Transfer 90% Ar, 10% CO2 DC+ 16 (⁵/₈) 15.2 (600) 29 260 5.7 (12.6)
.035" (0.9 mm) Spray Transfer 80% Ar, 20% CO2 DC+ 16 (⁵/₈) 6.4 (250) 23 100 1.9 (4.1)
.035" (0.9 mm) Spray Transfer 80% Ar, 20% CO2 DC+ 16 (⁵/₈) 8.9 (350) 25 140 2.6 (5.8)
.035" (0.9 mm) Spray Transfer 80% Ar, 20% CO2 DC+ 16 (⁵/₈) 12.7 (500) 27 180 3.9 (8.5)
.035" (0.9 mm) Spray Transfer 80% Ar, 20% CO2 DC+ 16 (⁵/₈) 16.5 (650) 29 220 5.1 (11.3)
.035" (0.9 mm) Spray Transfer 90% Ar, 10% CO2 DC+ 16 (⁵/₈) 6.4 (250) 24 100 1.9 (4.2)
.035" (0.9 mm) Spray Transfer 90% Ar, 10% CO2 DC+ 16 (⁵/₈) 8.9 (350) 26 140 2.6 (5.8)
.035" (0.9 mm) Spray Transfer 90% Ar, 10% CO2 DC+ 16 (⁵/₈) 12.7 (500) 28 180 3.9 (8.5)
.035" (0.9 mm) Spray Transfer 90% Ar, 10% CO2 DC+ 16 (⁵/₈) 16.5 (650) 30 220 4.9 (10.9)