Menu Close
Innershield Family

Diameters / Packaging

Diameters
 6.4 KG COIL
1.7 mm ED016312

Innershield® NR®-207

Flux-Cored Self-Shielded (FCAW-S)

CLASSIFICATIONS:
AWS A5.29 : E71T8-K6-H16

Innershield® NR®-207 from Lincoln Electric is designed for vertical down, hot, fill and cap passes on standard cross-country pipelines and arctic grade pipe.

Diameter

Select Diameter

  • 1.7 mm

Package

Select Package

  • 6.4 KG COIL

DETAILS

Designed for vertical down, hot, fill and cap passes on standard cross-country pipelines and arctic grade pipe. Recommended for API Pipe Grades X42 up to undermatching X70.

Features

  • Vertical down hot, fill and cap passes on standard cross-country pipelines and arctic grade pipe
  • Recommended for API grades X42 up to undermatching X70
  • High deposition rates

Typical Applications

  • Standard cross-country pipelines
  • Arctic grade pipe up to undermatched X70

Welding Positions

  • All

Shielding Gas

  • N/A

Service Information

You May Also Need

K126 Classic 350A FCAW-SS

K126® Classic® Innershield® 350A FCAW-SS Welding Gun 15 ft 062-332

K126-2
50 lb Can of Lincoln Electric Stick Electrodes

Pipeliner® 8P+

ED030826
Pipeliner

Pipeliner® NR®-207+ Flux-Cored (FCAW-S) Wire

ED030924
Pipeliner

Pipeliner® NR®-208-XP Flux-Cored (FCAW-S) Wire

ED031968
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.29 E71T8-K6-H16
AWS AWS A5.36 E71T8-A2-K6-H16
ABS AWS A5.29 E71T8-K6
BV BV - Chapter 5 SA3YMH
CWB CSA W48 E491T8-A3-K6-H16 (E491T8-K6-H16)
DNV-GL DNV - 2.9 III YMS H15

MECHANICAL PROPERTIES

Classification Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
E71T8-K6-H16 Requirement DC- 400 (58) min. 480-620 (70-90) 20 min. 27 (20) min.
E71T8-A2-K6-H16 Requirement DC- 400 (58) min. 480-660 (70-95) 22 min. 27 (20) min.
Typical Result, As-welded DC- 410 (59) 520-570 (75-82) 26 31-197 (23-145)

DEPOSIT COMPOSITION

Classification Polarity %Al %C %Cr %Mn %Mo %Ni %P %S %Si %V Diffusible Hydrogen
mL/100g Weld Metal
E71T8-K6-H16 Requirement DC- 1.8 max. 0.15 max. 0.20 max. 0.50 - 1.50 0.15 max. 0.40 - 1.00 0.030 max. 0.030 max. 0.80 max. 0.05 max. 16.0 max.
E71T8-A2-K6-H16 Requirement DC- 1.8 max. 0.15 max. 0.20 max. 0.50 - 1.50 0.15 max. 0.40 - 1.00 0.030 max. 0.030 max. 0.80 max. 0.05 max. 16 max.
Typical Result DC- 0.8-1.1 0.05-0.07 0.02-0.05 0.86-1.03 0.03 0.72-0.90 0.009 0.004 0.24-0.30 0.005 6.0

TYPICAL OPERATING PROCEDURES

Diameter Polarity CTWD
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
0.068 in (1.7 mm) DC- 25 (1) 2.0 (80) 17-18 190 1.7 (3.8) 1.3 (3.0) 79
0.068 in (1.7 mm) DC- 25 (1) 2.6 (105) 18-19 230 2.2 (5.3) 1.8 (4.0) 80
0.068 in (1.7 mm) DC- 25 (1) 3.0 (120) 19-20 245 2.5 (5.7) 2.0 (4.5) 79
0.068 in (1.7 mm) DC- 25 (1) 3.5 (140) 21-22 275 3.0 (6.8) 2.4 (5.5) 81
0.068 in (1.7 mm) DC- 25 (1) 4.4 (175) 21-22 295 3.6 (8.0) 2.9 (6.4) 80
5/64 in (2.0 mm) DC- 25 (1) 1.7 (70) 17-18 205 2.0 (4.5) 1.5 (3.4) 76
5/64 in (2.0 mm) DC- 25 (1) 2.0 (80) 18-19 225 2.3 (5.1) 1.7 (3.9) 76
5/64 in (2.0 mm) DC- 25 (1) 2.2 (90) 18-19 240 2.6 (5.8) 2.0 (4.5) 78
5/64 in (2.0 mm) DC- 25 (1) 2.7 (110) 20-21 275 3.1 (7.0) 2.4 (5.5) 79
5/64 in (2.0 mm) DC- 25 (1) 3.3 (130) 20-21 300 3.7 (8.3) 2.9 (6.5) 78