Aici puteti citi Politica noastra de Cookie. Dand click pe „Accept” sau continuând să utilizați site-ul nostru, sunteți de acord să folosim cookie-uri în modul descris în Politica noastră privind cookie-urile sau puteți respinge toate cookie-urile neesențiale aici. Vizualizati Politica Cookie

We may use this information to identify you and your interests, remember your preferences, track your website use, control access to content, administer, analyze, protect and improve the website, and process your requests, and for research and marketing, including to display ads relevant to your interests based on your online activities, both on this website and on other websites/apps.

We may share this information with our affiliates and research, analytics, advertising, marketing, co-branding and other partners and service providers.

By clicking “Accept”, you activate and agree to our use of cookies and other tracking technologies as described here and in our Cookie Policy.

I have read the cookie policy and understand that I must click “Accept” or “I Decline” at the bottom of the page.

Meniu Închidere
Innershield Family

Diametre / Ambalaj

Diametre
 6.4 KG COIL
 22.7 KG COIL
2,0 mm ED012739 ED012740
2,4 mm ED012736
3,0 mm ED012732
Diametre
 6.4 KG COIL
 22.7 KG COIL
2,0 mm ED012739 ED012740
2,4 mm ED012736
3,0 mm ED012732

Innershield® NS-3M

Sarma tubulara cu pulberi cu auto-protectie (FCAW-S)

CLASIFICARI:
E70T-4
E70T4-AZ-CS3

Innershield® NS-3M Wire for high deposition rates and resistance to hydrogen cracking on sulfur-contaminated steel.

Diametru

Selectare diametru

  • 2,0 mm
  • 2,4 mm
  • 3,0 mm

Ambalaj

Selectare ambalaj

  • 6.4 KG COIL
  • 22.7 KG COIL

DETALII

Designed for very high deposition rates and increased resistance to hydrogen cracking and porosity on steel containing sulfur or contaminates. Recommended for single or multiple pass welding on carbon steel and some low alloy steels in applications without impact strength requirements.

Caracteristici

  • Very high deposition rates
  • Increased resistance to hydrogen cracking and porosity
  • Soft, low penetrating arc for minimal base material admixture

Aplicații tipice

  • Open groove welds
  • Machinery bases and heavy equipment repair
  • Installing wear plates
  • 6.4 - 12.7 mm (1/4 - 1/2 in) single pass fillet and lap welds

Poziții de sudare

  • Plat/Orizontal

Gaz protector

  • N/A

Informații despre service

Documentație

S-ar putea să aveți nevoie și de

K126 Classic 350A FCAW-SS

Pistol de sudare K126® Classic® Innershield® 350A FCAW-SS 15 ft 062-332

K126-2
Innershield/Outershield/Submerged Arc Wire

Innershield® NS-3M

ED012732
Innershield/Outershield/Submerged Arc Wire

Innershield® NS-3M

ED012736
Innershield/Outershield/Submerged Arc Wire

Innershield® NS-3M

ED012740
Innershield, 54 lb master carton

Innershield® NR® -311

ED014464
Drive Roll and Guide Tube Kit

Set role avans sarma (2R) 2,0 mm - Sarma tubulara

KP1697-5/64
Innershield contact tip, .072 severe duty

Duza de contact Innershield® 2,0 mm (10/pak)

KP2100-4B1

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Pagina de căutare FDS

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.20 E70T-4
AWS AWS A5.36 E70T4-AZ-CS3
CWB CSA W48 E490T4-AZ-CS3-H16 (E492T-4-H16)
DB ISO 17632-A T 38 Z V N 3
CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.20 E70T-4
AWS AWS A5.36 E70T4-AZ-CS3
CWB CSA W48 E490T4-AZ-CS3-H16 (E492T-4-H16)
DB ISO 17632-A T 38 Z V N 3

MECHANICAL PROPERTIES

Classification Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
%
E70T-4 Requirement DC+ 400 (58) min. 480-660 (70-95) 22 min.
Typical Result, As-welded DC+ 410 (59) 570-640 (82-93) 23
Classification Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
%
E70T-4 Requirement DC+ 400 (58) min. 480-660 (70-95) 22 min.
Typical Result, As-welded DC+ 410 (59) 570-640 (82-93) 23

DEPOSIT COMPOSITION

Classification Polarity %Al %C %Mn %P %S %Si
E70T-4 Requirement DC+ 0.30 max. 1.75 max. 0.03 max. 0.03 max. 0.60 max.
Typical Result DC+ 1.3-1.5 0.20-0.27 0.35-0.45 0.011 0.004 0.26-0.30
Classification Polarity %Al %C %Mn %P %S %Si
E70T-4 Requirement DC+ 0.30 max. 1.75 max. 0.03 max. 0.03 max. 0.60 max.
Typical Result DC+ 1.3-1.5 0.20-0.27 0.35-0.45 0.011 0.004 0.26-0.30

TYPICAL OPERATING PROCEDURES

Diameter Polarity CTWD
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
5/64 in (2.0 mm) DC+ 54 (2 1/4) 5.1 (200) 29-31 280 5.5 (12.2) 4.6 (10.1) 83
5/64 in (2.0 mm) DC+ 54 (2 1/4) 6.1 (240) 30-32 315 6.7 (14.8) 5.5 (12.1) 82
5/64 in (2.0 mm) DC+ 54 (2 1/4) 6.6 (260) 30-32 330 7.3 (16.0) 6.0 (13.2) 83
5/64 in (2.0 mm) DC+ 54 (2 1/4) 7.6 (300) 31-33 350 8.4 (18.6) 6.9 (15.2) 82
3/32 in (2.4 mm) DC+ 76 (3) 2.8 (110) 28-30 250 4.6 (10.1) 3.7 (8.2) 81
3/32 in (2.4 mm) DC+ 76 (3) 3.8 (150) 29-31 300 6.4 (14.0) 5.3 (11.7) 84
3/32 in (2.4 mm) DC+ 76 (3) 4.7 (185) 30-32 350 7.9 (17.4) 6.6 (14.6) 84
3/32 in (2.4 mm) DC+ 76 (3) 5.8 (230) 31-33 400 9.8 (21.6) 8.3 (18.3) 85
3/32 in (2.4 mm) DC+ 76 (3) 7.0 (275) 32-34 450 11.8 (26.0) 10.0 (22.0) 85
0.120 in (3.0 mm) DC+ Electrical Stickout: 2 - 3/4 in (70 mm) 76 (3) 3.5 (140) 28-30 380 9.0 (19.8) 7.0 (15.5) 78
0.120 in (3.0 mm) DC+ Electrical Stickout: 2 - 3/4 in (70 mm) 76 (3) 4.4 (175) 29-31 450 11.2 (24.6) 9.1 (20.0) 81
0.120 in (3.0 mm) DC+ Electrical Stickout: 2 - 3/4 in (70 mm) 76 (3) 5.1 (200) 30-32 500 12.7 (28.0) 10.5 (23.2) 83
0.120 in (3.0 mm) DC+ Electrical Stickout: 2 - 3/4 in (70 mm) 76 (3) 7.6 (225) 31-33 550 14.2 (31.4) 11.9 (26.2) 83
0.120 in (3.0 mm) DC+ Electrical Stickout: 3 - 3/4 in (95 mm) 102 (4) 5.3 (210) 35-37 450 13.2 (29.0) 11.3 (25.0) 86
0.120 in (3.0 mm) DC+ Electrical Stickout: 3 - 3/4 in (95 mm) 102 (4) 6.4 (250) 36-38 500 15.6 (34.5) 13.2 (29.0) 84
0.120 in (3.0 mm) DC+ Electrical Stickout: 3 - 3/4 in (95 mm) 102 (4) 7.6 (300) 37-39 550 18.8 (41.5) 15.4 (34.0) 82
0.120 in (3.0 mm) DC+ Electrical Stickout: 3 - 3/4 in (95 mm) 102 (4) 9.0 (355) 38-40 600 22.2 (49.0) 18.0 (39.5) 81
Diameter Polarity CTWD
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
5/64 in (2.0 mm) DC+ 54 (2 1/4) 5.1 (200) 29-31 280 5.5 (12.2) 4.6 (10.1) 83
5/64 in (2.0 mm) DC+ 54 (2 1/4) 6.1 (240) 30-32 315 6.7 (14.8) 5.5 (12.1) 82
5/64 in (2.0 mm) DC+ 54 (2 1/4) 6.6 (260) 30-32 330 7.3 (16.0) 6.0 (13.2) 83
5/64 in (2.0 mm) DC+ 54 (2 1/4) 7.6 (300) 31-33 350 8.4 (18.6) 6.9 (15.2) 82
3/32 in (2.4 mm) DC+ 76 (3) 2.8 (110) 28-30 250 4.6 (10.1) 3.7 (8.2) 81
3/32 in (2.4 mm) DC+ 76 (3) 3.8 (150) 29-31 300 6.4 (14.0) 5.3 (11.7) 84
3/32 in (2.4 mm) DC+ 76 (3) 4.7 (185) 30-32 350 7.9 (17.4) 6.6 (14.6) 84
3/32 in (2.4 mm) DC+ 76 (3) 5.8 (230) 31-33 400 9.8 (21.6) 8.3 (18.3) 85
3/32 in (2.4 mm) DC+ 76 (3) 7.0 (275) 32-34 450 11.8 (26.0) 10.0 (22.0) 85
0.120 in (3.0 mm) DC+ Electrical Stickout: 2 - 3/4 in (70 mm) 76 (3) 3.5 (140) 28-30 380 9.0 (19.8) 7.0 (15.5) 78
0.120 in (3.0 mm) DC+ Electrical Stickout: 2 - 3/4 in (70 mm) 76 (3) 4.4 (175) 29-31 450 11.2 (24.6) 9.1 (20.0) 81
0.120 in (3.0 mm) DC+ Electrical Stickout: 2 - 3/4 in (70 mm) 76 (3) 5.1 (200) 30-32 500 12.7 (28.0) 10.5 (23.2) 83
0.120 in (3.0 mm) DC+ Electrical Stickout: 2 - 3/4 in (70 mm) 76 (3) 7.6 (225) 31-33 550 14.2 (31.4) 11.9 (26.2) 83
0.120 in (3.0 mm) DC+ Electrical Stickout: 3 - 3/4 in (95 mm) 102 (4) 5.3 (210) 35-37 450 13.2 (29.0) 11.3 (25.0) 86
0.120 in (3.0 mm) DC+ Electrical Stickout: 3 - 3/4 in (95 mm) 102 (4) 6.4 (250) 36-38 500 15.6 (34.5) 13.2 (29.0) 84
0.120 in (3.0 mm) DC+ Electrical Stickout: 3 - 3/4 in (95 mm) 102 (4) 7.6 (300) 37-39 550 18.8 (41.5) 15.4 (34.0) 82
0.120 in (3.0 mm) DC+ Electrical Stickout: 3 - 3/4 in (95 mm) 102 (4) 9.0 (355) 38-40 600 22.2 (49.0) 18.0 (39.5) 81