Diametre / Ambalaj
|
Diametre |
(3) 8 lb Easy Open Can |
(3) 10 lb Easy Open Can |
|---|---|---|
| 1/8 x 14 in (3.2 x 350 mm) | EL112125634 | |
| 3/32 x 12 in (2.4 x 300 mm) | EL112093632 | |
| 5/32 x 14 in (4.0 x 350 mm) | EL112156634 |
DETALII
Tech-Rod® offers a wide variety of nickel alloy grades of stick electrodes lot tested with certificates of actual deposit chemistry and typical mechanical results available online
Caracteristici
- A covered electrode which is used to weld nickel-chromium-molybdenum alloys
- These electrodes are used in applications where the temperature ranges from cryogenic up to 1800°F (982°C)
- Q2 Lot® - certificates showing actual deposit composition available online
Aplicații tipice
- General Fabricaton
- Maintenance and Repair Welding
- Dissimilar joints between nickel-chromium molybdenum alloys to stainless steels, carbon or low alloys steels
Poziții de sudare
- Polarity DC+
Gaz protector
- N/A
Informații despre service
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Pagina de căutare FDS
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.11 | ENiCrMo-3 |
MECHANICAL PROPERTIES
| Classification |
Tensile Strength
MPa (ksi) |
Elongation
% |
|---|---|---|
| ENiCrMo-3 Requirement | 760 (110) min. | 30 min. |
| Typical Result, As-welded | 790 (114) | 44 |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Cu | %Fe | %Mn | %Mo | %P | %S | %Si | %Nb+Ta | %Ni+Co |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ENiCrMo-3 Requirement | 0.10 max. | 20.0 - 23.0 | 0.50 max. | 7.0 max. | 1.0 max. | 8.0 - 10.0 | 0.03 max. | 0.02 max. | 0.75 max. | 3.15 - 4.15 | 55.0 min. |
| Typical Result | 0.04 | 22.7 | 0.00 | 1.4 | 0.5 | 8.5 | 0.01 | 0.00 | 0.33 | 3.55 | 62.5 |
TYPICAL OPERATING PROCEDURES
| Diameter |
Current
Amps |
|---|---|
| 3/32" (2.4 mm) | 65-85 |
| 1/8" (3.2 mm) | 80-110 |
| 5/32" (4.0 mm) | 110-140 |
| 3/16" (4.8 mm) | 110-160 |