FLUXO P 125 PENETRANT

This non destructive technique allows the detection of cracksopening on the surface of the plate helping a visual control, due to the cracks becoming visible (30 to 50 μm). + Product: Temperature of use: 0 °C to 50 °C. Easy to use even on hot plates. Good impregnation. A single spray lasts more than 30 min without drying. Inspection of the defects: Cracks are visible at the surface of the plates, thanks to clear vivid red indications easily seen by the naked eye (no UV light required). Powerful penetration. Due to its viscosity. Spray: works in all positions. Very good identifi cation of cracks under white light. Easy to remove with water. No “ground” noise. Butane/propane spraying (extremely fl ammable).

Features

• Type II - level 2 - Methode AC Non destructive testing. Localization of the emerging defects. Water rinse. Without rhodamine. Use temperature 0°C - 50°C.
• Easy to use even on hot plates.
• Good impregnation. A single spray lasts more than 30 min without drying.
• Powerful penetration due to its viscosity.
• Spraying in all positions.
• Very good identification of the cracks under white light
• Easy to remove with water. No “ground” noise. Instructions: Be sure the area is clean. Spray at 20 cm FLUXO P125 - PENETRANT for a complete recover of the area. Let it penetrate at least 10 minutes. Rinse with FLUXO S190 - CLEANER or water. Control with FLUXO R175 - DEVELOPER. Propellant: Butane / Propane. Volume : 500 ml (net) - 650 ml (nominal).
• CAUTION: before use, carefully read and understand the safety datasheet available on our websites