Special Alloys Packaging - MIG-TIG wires

Çaplar / Paketleme

Çaplar	5.0 KG PE tube
2.4 mm	T9CRMO-24

9CRMO

TIG (GTAW)

AWS:
AWS A5.28M : ER80S-B8
EN ISO 21952-A : W CrMo9

B8 alloyed steel designed for high strength and improved corrosion resistance

DETAYLAR

Low Alloy Steel • AWS A5.28M ER80S-B8

Özellikleri

B8 alloyed steel: 9% chromium, 1% molybdenum martensitic alloy for elevated temperature service up to 600°C (1112°F)
Designed for high strength and improved corrosion resistance in superheated steam, hot hydrogen gas and high sulphur crude oils where higher performance than 5% chromium, 0.5% molybdenum steels is required

Kaynaklama Konumları

Koruyucu gaz

100% Argon

Servis Bilgileri

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Arama sayfası

Test sonucunu görün sorumluluk reddi

CONFORMANCE

CONFORMANCES	SPECIFICATION	CLASSIFICATION
AWS	AWS A5.28	ER80S-B8

MECHANICAL PROPERTIES

Classification	Postweld Heat Treatment	Shielding Gas	Polarity	Yield Strength @ 0.2% Offset MPa (ksi)	Tensile Strength MPa (ksi)	Elongation %
ER80S-B8 Requirement		100% Ar	DC-	470 (68) min.	550 (80) min.	17 min.
Typical Result, Stress relieved	1 hour @ 745°C (1375°F)	100% Ar	DC-	600 (88)	720 (104)	23

WIRE COMPOSITION

Classification	%C	%Cr	%Mn	%Mo	%Ni	%P	%S	%Si	%Total Cu
ER80S-B8 Requirement	0.10 max.	8.00 - 10.50	0.40 - 0.70	0.80 - 1.20	0.50 max.	0.025 max.	0.025 max.	0.50 max.	0.35 max.
Typical Result	0.09	8.58	0.51	0.94	0.08	0.016	0.002	0.42	0.05