You can view the site in Turkish or English language. Visit Website

Menü Kapat
outer box carton vpmd

Çaplar / Paketleme

Çaplar
 VPMD 11,4 KG (6 x 1,9 KG, approx. 480 pcs)
 VPMD 12 KG (6 x 2 KG, approx. 330 pcs)
2.5x350 mm CHROMET1X-25-2
3.2x350 mm CHROMET1X-32-2

CHROMET® 1X

Örtülü Elektrot (SMAW)

AWS:
AWS A5.5 : E8018-B2 H4R
EN ISO 3580-A : E CrMo1 B 3 2 H5
EN ISO 3580-B : E 5516-1CM

B2 alloyed steel designed for prolonged elevated temperature service up to 550°C

Çap

Çap Seçin

  • 2.5x350 mm
  • 3.2x350 mm

Paket

Paket Seç

  • VPMD 11,4 KG (6 x 1,9 KG, approx. 480 pcs)
  • VPMD 12 KG (6 x 2 KG, approx. 330 pcs)

DETAYLAR

Stick electrode – 1¼Cr-½Mo deposit which meets specific requirements for improved temper embrittlement resistance with prolonged service at 400-600°C.

Özellikleri

  • 1¼Cr-½Mo deposit which meets specific requirements for improved embrittlement resistance after prolonged service at 400-600°C
  • Relevant trace elements (P, Sn, As, Sb) are controlled to ensure low Bruscato (X) and Watanabe (J) factors
  • Basic flux, metal powder type coatings on low carbon high purity core wire
  • Recovery is about 115%

Tipik Uygulamalar

  • Petro-Chemical
  • Power Plants
  • Piping
  • Turbine Casting
  • Boiler Superheaters

Kaynaklama Konumları

  • All position, except vertical down

Servis Bilgileri

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Arama sayfası

Test sonucunu görün sorumluluk reddi

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.5 E8018-B2 H4R
ISO ISO 3580-A E CrMo1 B 3 2 H5
ISO ISO 3580-B E 5516-1CM

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
%
E8018-B2 H4R Requirement 460 (67) min. 550 (80) min. 19 min.
E CrMo1 B 3 2 H5 Requirement 355 (51) min. 510 (74) min. 20 min.
E 5516-1CM Requirement 460 (67) min. 550 (80) min. 17 min.
Typical Result, Stress relieved 520 (76) 610 (88) 25

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Nb %Ni %P %S %Si %Total Cu
E8018-B2 H4R Requirement 0.05 - 0.12 1.00 - 1.50 0.90 max. 0.40 - 0.65 0.03 max. 0.03 max. 0.80 max.
E CrMo1 B 3 2 H5 Requirement 0.05 - 0.12 0.90 - 1.40 0.40 - 1.50 0.45 - 0.70 0.01 max. 0.3 max. 0.030 max. 0.025 max. 0.80 max. 0.3 max.
E 5516-1CM Requirement 0.05 - 0.12 1.00 - 1.50 0.90 max. 0.40 - 0.65 0.030 max. 0.030 max. 0.80 max.
Typical Result 0.06 1.25 0.70 0.55 0.00 0.1 max. 0.009 0.012 0.25 0.0 max.

TYPICAL OPERATING PROCEDURES

Diameter Current
Amps
2.5 mm (3/32") 70-110
3.2 mm (1/8") 80-140
4.0 mm (5/32") 100-180
5.0 mm 140-240