Çaplar / Paketleme
|
Çaplar |
8 lb (3.6 kg) Easy Open Can |
10 lb (4.5 kg) Easy Open Can |
|---|---|---|
| 1/8 x 14 in (3.2 x 350 mm) | ELWLDA125634 | |
| 3/32 x 12 in (2.4 x 300 mm) | ELWLDA093632 | |
| 5/32 x 14 in (4.0 x 350 mm) | ELWLDA156634 |
DETAYLAR
TECH-ROD® Weld A provides overlay cladding on nickel-chromium-iron alloys, mild steels to stainless steels and where a similar composition is needed.
Özellikleri
- Overlay cladding where a similar composition is needed
- Q2 Lot® - certificates showing actual deposit composition available online
Tipik Uygulamalar
- For dissimilar welds between nickel-chromium-iron alloys to mild steels or stainless steels
- Furnace equipment
- Petrochemical plants
Kaynaklama Konumları
- Polarity DC+
Koruyucu gaz
- N/A
Servis Bilgileri
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Arama sayfası
Test sonucunu görün sorumluluk reddi
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.11 | ENiCrFe-2 |
MECHANICAL PROPERTIES
| Classification |
Tensile Strength
MPa (ksi) |
Elongation
% |
|---|---|---|
| ENiCrFe-2 Requirement | 550 (80) min. | 30 min. |
| Typical Result, As-welded | 659 (95) | 43 |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Cu | %Fe | %Mn | %Mo | %P | %S | %Si | %Nb+Ta | %Ni+Co |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ENiCrFe-2 Requirement | 0.10 max. | 13.0 - 17.0 | 0.50 max. | 12.0 max. | 1.0 - 3.5 | 0.5 - 2.5 | 0.03 max. | 0.02 max. | 0.75 max. | 0.5 - 3.0 | 62.0 min. |
| Typical Result | 0.04 | 15.1 | 0.06 | 10.3 | 3.1 | 1.5 | 0.02 | 0.01 | 0.45 | 2.1 | 67.0 |
TYPICAL OPERATING PROCEDURES
| Diameter |
Current
Amps |
|---|---|
| 3/32" (2.4 mm) | 65-85 |
| 1/8" (3.2 mm) | 80-110 |
| 5/32" (4.0 mm) | 100-140 |
| 3/16" (4.8 mm) | 110-160 |