Durchmesser / Lieferform

Durchmesser	22.7 KG COIL
2,0 mm	ED026858

Innershield® NR®-212

Schweißen mit selbstschützenden Fülldrähten (FCAW-S)

KLASSIFIZIERUNGEN::
AWS A5.29 : E71TG-G

Innershield® NR®-212 from Lincoln Electric is recommended for single or multiple pass welding on up to 19 mm (3/4 in.) thicknesses.

Lincoln Electric Geschäftspartner?

Melden Sie sich an, um Ihren Preis zu sehen

DETAILS

Designed with the same arc characteristics of NR®-211-MP, but for use on a larger range of applications. Recommended for single or multiple pass welding on up to 19 mm (3/4 in) thicknesses.

Eigenschaften

Geeignet für eine Vielzahl unlegierter Stähle
Schnell erstarrend, tolerant gegenüber ungenauer Nahtvorbereitung
Gleichmäßige Lichtbogenleistung
Einfache Handhabung

Typische Anwendungen

Ein- oder Mehrlagenschweißen bei Blechstärken bis 19 mm (3/4 in)
LKW-Karosserie, Behälter, Trichter, Gestelle, Gerüste,
Allgemeine Fertigung
Robotertechnik

Schweißpositionen

Alle

Schutzgas

Service Informationen

Dokumentation

InnershieldNR-212-de.pdf Datenblatt

Ergänzende Produkte

K126® Classic® Innershield® 350A FCAW-SS Welding Gun 15 ft 062-332

K126-2

Schweißbrenneradapter, Kit für Lincoln Electric Brenner

K1500-1

Antriebsrollen Satz (2R) 2.0 mm

KP1697-5/64

Innershield contact tip, .072 severe duty

Innershield® Contact Tip - Severe Duty 2mm, 7.9mm long, 18 thread (10/pak)

KP2100-4B1

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS-Suchseite

CONFORMANCE

CONFORMANCES	SPECIFICATION	CLASSIFICATION
AWS	AWS A5.29	E71TG-G-H16
AWS	AWS A5.36	E71TG-AZ-G-H16
CWB	CSA W48	E491TG-AZ-G-H16 (E491TG-G-H16)

MECHANICAL PROPERTIES

Classification	Polarity	Yield Strength @ 0.2% Offset MPa (ksi)	Tensile Strength MPa (ksi)	Elongation %
E71TG-G-H16 Requirement	Not Specified	400 (58) min.	480-620 (70-90)	20 min.
Typical Result, As-welded	DC-	410 (60)	540-610 (78-89)	22

DEPOSIT COMPOSITION

Classification	Polarity	%Al	%C	%Mn	%Mo	%Ni	%P	%S	%Si	%V	Diffusible Hydrogen mL/100g Weld Metal
E71TG-G-H16 Requirement	Not Specified	1.8 max.		0.50 min. *	0.20 min. *	0.50 min. *	0.030 max.	0.030 max.	1.00 max.	0.10 min. *	16.0 max.
Typical Result	DC-	1.2-1.8	0.11	0.86-1.99	0.02	0.88-1.21	0.013	0.005	0.15-0.34	0.005	6.1

TYPICAL OPERATING PROCEDURES

Diameter	Polarity	CTWD mm (in.)	Wire Feed Speed m/min (in/min)	Voltage volts	Approx. Current amps	Melt-off Rate kg/hr (lb/hr)	Deposition Rate kg/hr (lb/hr)	Efficiency %
0.045 in (1.1 mm)	DC-	16 (5/8)	1.4 (55)	14-15	75	0.5 (1.3)	0.5 (1.1)	84
0.045 in (1.1 mm)	DC-	16 (5/8)	1.8 (70)	15-16	90	0.7 (1.6)	0.6 (1.4)	87
0.045 in (1.1 mm)	DC-	16 (5/8)	2.3 (90)	16-17	115	1.0 (2.1)	0.8 (1.8)	85
0.045 in (1.1 mm)	DC-	16 (5/8)	2.8 (110)	17-18	135	1.2 (2.6)	1.0 (2.2)	84
0.045 in (1.1 mm)	DC-	16 (5/8)	3.3 (130)	18-19	155	1.4 (3.1)	1.2 (2.6)	83
0.045 in (1.1 mm)	DC-	16 (5/8)	4.1 (160)	19-20	170	1.6 (3.5)	1.4 (3.0)	85
0.068 in (1.7 mm)	DC-	25 (1)	1.5 (60)	16-17	145	1.4 (3.1)	1.1 (2.4)	77
0.068 in (1.7 mm)	DC-	25 (1)	1.9 (75)	17-18	180	1.7 (3.8)	1.4 (3.2)	84
0.068 in (1.7 mm)	DC-	25 (1)	2.3 (90)	18-19	200	2.0 (4.5)	1.7 (3.8)	84
0.068 in (1.7 mm)	DC-	25 (1)	3.0 (120)	19-20	230	2.7 (6.0)	2.3 (5.2)	86
0.068 in (1.7 mm)	DC-	25 (1)	3.8 (150)	20-21	255	3.3 (7.4)	2.9 (6.4)	86
0.068 in (1.7 mm)	DC-	25 (1)	4.4 (175)	22-23	275	3.9 (8.7)	3.4 (7.5)	86
5/64 in (2.0 mm)	DC-	25 (1)	1.5 (60)	16-17	200	1.7 (3.8)	1.5 (3.3)	86
5/64 in (2.0 mm)	DC-	25 (1)	1.9 (75)	18-19	225	2.1 (4.7)	1.8 (4.1)	87
5/64 in (2.0 mm)	DC-	25 (1)	2.3 (90)	19-20	245	2.6 (5.7)	2.3 (5.0)	87
5/64 in (2.0 mm)	DC-	25 (1)	2.8 (110)	20-21	275	3.2 (7.1)	2.8 (6.2)	87
5/64 in (2.0 mm)	DC-	25 (1)	3.3 (130)	21-23	300	3.7 (8.3)	3.3 (7.3)	87
5/64 in (2.0 mm)	DC-	25 (1)	3.8 (150)	22-23	325	4.3 (9.6)	3.8 (8.4)	87

NOTES

Note
* To meet the requirements of a "G" classification, the chemical composition of the weld deposit must meet the minimum requirement for one or more of these elements.