Durchmesser / Lieferform
|
Durchmesser |
55 lb Spool |
|---|---|
| 2,4 mm (3/32 in) | ED035168 |
DETAILS
LINCOLNWELD® 309/309L provides reduced carbon levels (0.03% max) that offers increased resistance to inter-granular corrosion, ideal for joining stainless steels to themselves or to carbon or low alloy steels, and can be used at temperatures up to 700°F (371°C).
Eigenschaften
- Designed to be used primarily with basic fluxes that recover nearly all of the wire chromium in the deposit
- Low carbon content recommended where there is a risk of intergranular corrosion
- Reduced carbon levels (0.03% max) that offers increased resistance to inter-granular corrosion
- Q2 Lot® - Certificate showing actual wire composition and calculated ferrite number (FN) available online
Typische Anwendungen
- ASTM A743, A744 Types CF-8 and CF-3 and ASTM A240 Type 309S
- For joining carbon or mild alloy steel to austenitic stainless steels
- Can also be used on “18-8” steels, since it overmatches the corrosion resistance, if the weldment will not be exposed to temperatures of 538° C to 927° C (1000° F to 1700° F)
- Ideal for joining stainless steels to themselves or to carbon or low alloy steels, and can be used at temperatures up to 700°F (371°C)
Schweißpositionen
- Not applicable
Schutzgas
- N/A
Service Informationen
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS-Suchseite
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.9 | ER309, ER309L |
| ISO | ISO 14343-B | SS309L |
| ABS | AWS A5.9 | ER309, ER309L |
| CWB | CSA W48 | ER309,ER309L |
| MIL | MIL-E-19933E AMD1 | MIL-309 |
WIRE COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %N | %Nb | %Ni | %P | %S | %Si | Ferrite Number (Delong ©) | Ferrite Number (WRC-1992 ©) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ER309 Requirement | 0.12 max. | 23.0 - 25.0 | 0.75 max. | 1.0 - 2.5 | 0.75 max. | Info. Only | Info. Only | 12.0 - 14.0 | 0.03 max. | 0.03 max. | 0.30 - 0.65 | ||
| ER309L Requirement | 0.03 max. | 23.0 - 25.0 | 0.75 max. | 1.0 - 2.5 | 0.75 max. | Info. Only | Info. Only | 12.0 - 14.0 | 0.03 max. | 0.03 max. | 0.30 - 0.65 | Info. Only | Info. Only |
| SS309L Requirement | 0.03 max. | 23.0 - 25.0 | 0.75 max. | 1.0 - 2.5 | 0.75 max. | Info. Only | 12.0 - 14.0 | 0.03 max. | 0.03 max. | 0.30 - 0.65 | Info. Only | Info. Only | |
| Typical Result | 0.01-0.02 | 23.3-23.8 | 0.03-0.09 | 1.6-1.9 | 0.03-0.11 | 0.06-0.08 | 0.04 max. | 13.4-13.7 | 0.02 | 0.02 max. | 0.36-0.51 | 9.00-14.00 | 8.00-12.00 |
TYPICAL OPERATING PROCEDURES
| Diameter |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|
| 5/64 in (2.0 mm) | 80-240 (2.0-6.1) | 24-30 | 190-500 |
| 3/32 in (2.4 mm) | 60-210 (1.5-5.3) | 26-32 | 195-575 |
| 1/8 in (3.2 mm) | 35-110 (0.9-2.8) | 28-34 | 200-700 |
| 5/32 in (4.0 mm) | 30-75 (0.8-1.9) | 30-36 | 320-775 |