DETAILS
BLUE MAX® MIG 410 ideal for use as an overlay on carbon steels to impart corrosion, erosion and abrasion resistance.
Features
- Q2 Lot® - Certified Material Test Report showing actual wire composition and Country of Origin of each lot is available online in the Certificate Center
- Proprietary surface lubricant for steady feeding and arc stability leading to exceptional performance at high wire feed speeds
- Designed to weld stainless steels of similar chemical composition as well as to overlay carbon steels to impart corrosion, erosion and abrasion resistance
- Preheat and inter-pass temperature of 400°F (200°C) or greater are recommended during welding
Typical Applications
- Surfacing Steel Mill Rolls
- Furnace and Burner Parts
- Turbine Parts
Welding Positions
- All
Shielding Gas
- 98% Ar / 2% O₂
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.9 | ER410 |
| CWB | CSA W48 | ER410 |
| MIL | MIL-E-19933E AMD1 | MIL-410 |
WIRE COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %N | %Ni | %P | %S | %Si |
|---|---|---|---|---|---|---|---|---|---|---|
| ER410 Requirement | 0.12 max. | 11.5 - 13.5 | 0.75 max. | 0.6 max. | 0.75 max. | 0.6 max. | 0.03 max. | 0.03 max. | 0.5 max. | |
| Typical Result | 0.08-0.12 | 11.9-12.3 | 0.03-0.09 | 0.4-0.5 | 0.02-0.03 | 0.01-0.04 | 0.1-0.2 | 0.02 | 0.003 max. | 0.3-0.4 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|
| 0.035 in (0.9 mm) | 98% Ar / 2% O2 | 26-29 | 160-210 |
| 0.045 in (1.1 mm) | 98% Ar / 2% O2 | 28-32 | 180-250 |
| 1/16" (1.6 mm) | 98% Ar, 2% O2 | 29-33 | 200-280 |