Metal-Cored Wires

Metalshield Consumables

Metalshield® MC-80 XLS™

Metal-Cored Gas-Shielded (GMAW-C)

E80C-Ni1-H4, E80T15-M21A5-Ni1-H4

Metalshield® MC-80 XLS™ from Lincoln Electric is a low alloy metal-cored wire designed with minimal silicon islands for an exceptionally clean weld surface and minimal post weld clean up.

Metalshield Consumables

Metalshield® MC®-110

Metal-Cored Gas-Shielded (GMAW-C)

E110C-K4 H4, E110T15-M20A6-K4-H4

Metalshield® MC®-110 from Lincoln Electric is a low alloy metal cored wire capable of producing welds with tensile strengths of 760 MPa (110 ksi).

Metalshield Consumables

Metalshield® Z

Metal-Cored Gas-Shielded (GMAW-C)

Metalshield® Z from Lincoln Electric is designed to enhance productivity and quality of single pass lap and fillet welds on galvanized and other zinc coated steels (galvannealed).

Flux-cored wire coil

Outershield® MC-710-H

Metal-Cored Gas-Shielded (GMAW-C)

AS/NZS ISO 17632-A: T 46 3 M C 2 H5, AS/NZS ISO 17632-B: T49 3 T15-0/1 M A U H5

Unalloyed, Structural and equipment, Down-hand

Flux-cored wire coil

Outershield® MC715-H

Metal-Cored Gas-Shielded (GMAW-C)

AS/NZS ISO 17632-A: T 46 4 M M 2 H5, AS/NZS ISO 17632-B: T49 4 T15-1 M A U H5

Unalloyed, High demand applications and low temperature service, Down-hand

Flux-cored wire coil

Outershield® MC715Ni1-H

Metal-Cored Gas-Shielded (GMAW-C)

AS/NZS ISO 17632-A T 46 5 1Ni M M 2 H5, AS/NZS ISO 17632-B: T55 5 T15-1 M A N2 U H5

Low Alloy, Critical and low temperature service, Down-hand

Hardfacing Consumables Family Group

Lincore® 30-S

Metal-Cored Submerged Arc (SAW) Wire

LINCORE® 30-S Metal-Cored Submerged Arc Wire is ideal for mild and low alloy steels intended for build-up before final overlay, and as a final surface with moderate impact (Metal to Metal)

Hardfacing Consumables Family Group

Lincore® 35-S

Metal-Cored Submerged Arc (SAW) Wire

LINCORE® 35-S Metal-Cored Submerged Arc Wire is designed for mild and low alloy steels, intended for rolling and sliding with unlimited deposit thickness (Metal-to-Metal)

Hardfacing Consumables Family Group

Lincore® 40-S

Metal-Cored Submerged Arc (SAW) Wire

LINCORE® 40-S Metal-Cored Submerged Arc Wire designed for rebuilding heavy equipment undercarriages, to be used on carbon and low alloy steels applications limited to four layers (Metal to Metal)

Hardfacing Consumables Family Group

Lincore® 42-S

Metal-Cored Submerged Arc (SAW) Wire

LINCORE® 42-S Metal-Cored Submerged Arc Wire designed for rebuilding heavy equipment on tractor rollers, tractor idlers and track pads intended to resist rolling and sliding wear applications (Metal-to-Metal)

fluxofil, seamless cored wires

FLUXOFIL M 10

Metal-Cored Gas-Shielded (GMAW-C)

FLUXOFIL M10 is a copper-coated wire with excellent welding properties in short-arc and spray-arc ranges.